How to replace the battery in the Volkswagen Tiguan L remote key?

1 Answers
HaydenMarie
07/29/25 11:31am
To replace the battery in the Volkswagen Tiguan L remote key, follow these steps: 1. Pry open one end of the battery cover by lifting it at the middle seam of the remote key. 2. Use a toothpick to insert into the notch at the edge of the battery and remove it. 3. Place the new battery into the battery slot and close the battery cover. 4. Gently press the battery cover to ensure it is securely closed. Taking the 2017 Tiguan as an example, it is a compact SUV with body dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, a wheelbase of 2684mm, and a body weight of 1600kg. The 2017 Tiguan is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 160PS, a maximum torque of 250Nm, and a maximum power of 118kW, paired with a 6-speed automatic transmission.
Was this review help?
19
5
Share
More Forum Discussions

What does the car A mean?

Vehicle displayed A refers to the automatic parking system (AUTOHOLD). The following is extended information about the car automatic parking system: Definition of the automatic parking system: The automatic parking system (AUTOHOLD) is a technical application that can realize automatic handbrake during car operation. This technology enables the driver to not need long-time braking when the vehicle stops, and under the condition of starting the automatic electronic parking brake, it can avoid unnecessary sliding of the vehicle. Precautions for the automatic parking system: It will be automatically released when the driving force is greater than the resistance, so there is no need to put the gear in neutral. When parking for a long time, it is best to put the gear in neutral or P gear and start the handbrake system.
16
0
Share

What is the output voltage and current of a car cigarette lighter?

The output voltage of a cigarette lighter is 12V, and the current is generally 30A. Here is an introduction to the related knowledge of car cigarette lighters: 1. Function: The cigarette lighter is a device in a car. In the traditional sense, the cigarette lighter draws power from the car's power source to heat a metal heating element or heating wire, providing a flame source for lighting cigarettes. 2. Working Principle: Besides lighting cigarettes, the car cigarette lighter can also be equipped with a car inverter, which converts the car's 12V, 24V, or 48V DC power into 220V/50Hz AC power for use with ordinary electrical appliances. For example, it can be used to charge mobile electronic devices.
7
0
Share

What lights should be used when driving on the highway at night?

When driving on the highway at night, high beams should be used. Below is a partial introduction about using high beams on highways at night: Reason for use: Because of the high speed, better visibility is needed. High beams can better illuminate the distance ahead. If there are any abnormal road conditions, quick judgment can be made. If low beams are used instead, it may be too late to react, which can easily lead to accidents. Safety: Using high beams on highways is very safe. Since highways are mostly closed roads, using high beams in such conditions will not dazzle oncoming drivers. On the contrary, it provides excellent safety protection.
8
4
Share

What Are the Symptoms of a Bad Front Wheel Bearing?

The symptoms of a bad front wheel bearing are: 1. A 'squeaking' sound when turning the steering wheel while stationary or at low speeds, with severe cases causing noticeable steering wheel vibration; 2. Noticeably increased tire noise while driving, with severe cases producing a 'humming' sound; 3. A 'thumping' sound when driving on bumpy roads or over speed bumps; 4. Vehicle pulling to one side. The main functions of the bearing are to bear weight and provide precise guidance for the rotation of the wheel hub. It withstands both axial and radial loads, making it a crucial component. In traditional automobiles, wheel bearings consist of two sets of tapered roller bearings or ball bearings combined. The installation, greasing, sealing, and adjustment of bearing clearance are all performed on the automobile production line.
11
4
Share

What to Do If the Chassis Gets Scratched?

Solutions for a scratched chassis: 1. If it's a minor scratch that only affects the metal or plastic parts of the chassis, it can be fixed with simple touch-up paint or repair; 2. If the undercarriage is impacted, vulnerable components like the transmission, engine oil pan, exhaust pipe, and fuel tank may be damaged. Additionally, the suspension, steering linkage, and various fluid pipes could break or get damaged due to collision with protruding objects, requiring inspection and repair at a 4S shop. Methods for maintaining the car chassis include: 1. Regularly checking the condition of the car tires; 2. Periodically cleaning and washing the car chassis; 3. Inspecting the operational status of various parts of the vehicle chassis; 4. Checking and maintaining the car shock absorbers.
4
3
Share

What is the normal idle speed for a vehicle?

Vehicle idle speed is considered normal between 550 to 800 revolutions per minute (RPM). The minimum rotational speed required to maintain stable engine operation is referred to as idle speed, which is one of the five fundamental operating conditions of an engine. The idle speed can be adjusted by modifying the throttle opening size and the idle fuel supply quantity. Engine types include: 1. Classified by fuel type: gasoline engines and diesel engines; 2. Classified by stroke: four-stroke internal combustion engines and two-stroke internal combustion engines; 3. Classified by cooling method: water-cooled engines and air-cooled engines; 4. Classified by cylinder arrangement: single-cylinder engines and twin-cylinder engines; 5. Classified by intake system: naturally aspirated engines, turbocharged engines, and supercharged engines.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.