How to replace the battery in the Lingpai key?
3 Answers
Method for replacing the Lingpai key battery: 1. Press the small switch on the key to remove the mechanical key; 2. After pulling out the mechanical key, you will see a gap around the key casing. Use a flathead screwdriver or other thin tool to pry it open, moving along the gap all the way around; 3. Once opened, remove the small battery inside and replace it with a new one, ensuring the positive side faces up; 4. After replacing the battery, press the key casing back together. Taking the Lingpai 2019 180Turbo CVT Luxury Edition as an example, its dimensions are 4756mm in length, 1804mm in width, and 1509mm in height, with a wheelbase of 2730mm. The body adopts a 4-door, 5-seater sedan structure, equipped with a 1.0L inline 4-cylinder turbocharged engine, delivering a maximum power of 90kW, paired with a CVT continuously variable transmission.
I often change the battery of my Lingpai key myself, it's quite simple. Get a small Phillips or flat-head screwdriver and prepare a CR2032 button battery, which is the standard model—don't get the wrong one. Work on a clean table, first flip the key over, there's a small gap on the back cover, gently pry it open. Once the cover is off, you'll see the old battery—just pull it out and discard it, but be careful not to lose any small parts. Insert the new battery in the correct direction, with the positive side (marked with a plus sign) facing up. When putting the cover back, align it properly and press firmly until you hear a click. Test it immediately after replacing: press the key button to see if the car lock responds normally. If there's no response, the battery might be inserted backward or there's poor contact. It's recommended to check the battery life every two years to avoid malfunctions that could affect your car usage. The whole process takes less than five minutes—saving money and giving peace of mind. Avoid using excessive force to prevent damaging the key casing.
Replacing the Lingpai key battery is actually quite simple. As someone who enjoys DIY projects, I can walk you through it. Gather your tools: a small screwdriver and a CR2032 battery. The key's back cover has a small groove—use the screwdriver to gently pry it open, avoiding excessive force to prevent cracking. Remove and dispose of the old battery, then insert the new CR2032 battery with the positive side facing up (this orientation is crucial for proper key function). Press the cover back firmly until it clicks into place. Immediately test the remote functions afterward, such as pressing the unlock button near your car to check responsiveness. If it fails, check for dust on the battery contacts or ensure the cover is securely fastened. I recommend preventive maintenance—inspect the key battery during car washes. This process saves time and avoids shop fees, using tools readily available at home.
