How to Replace the Battery in an XRV Car Key?
2 Answers
XRV car key battery replacement method is: 1. Flip the small switch on the key; 2. Remove the mechanical key; 3. Use a flathead screwdriver or other thin tool to pry the gap around the key shell; 4. Move along the gap for a full circle until the smart key separates into two halves; 5. Take out the old battery and replace it with a new one; 6. Press the key shell back together; 7. Reinsert the mechanical key. The XRV is a compact SUV with body dimensions of: length 4328mm, width 1772mm, height 1610mm, wheelbase 1610mm, and a fuel tank capacity of 50 liters.
As a long-time car enthusiast, I'm quite familiar with replacing car key batteries. The XRV key typically uses a CR2032 battery, which is easily available at supermarkets or online. Locate the small seam on the back of the key, gently pry open the back cover using a coin or small screwdriver - be careful not to use too much force to avoid scratching the casing. Carefully remove the old battery, noting the positive terminal direction (usually marked side up), then insert the new battery ensuring the same orientation. Snap the cover back on firmly and test if the key buttons unlock the doors. I recommend buying good quality batteries to avoid leakage issues. DIY replacement can save you dozens of yuan and is quicker, but if the cover proves too difficult to open, check online tutorials to avoid mistakes. The whole process takes about ten minutes and is quite convenient.
