How to Replace the Battery in an Older Mercedes-Benz SLC260 Key?

2 Answers
VanWyatt
07/29/25 3:12am
Steps to replace the battery in an older Mercedes-Benz SLC260 key are as follows: 1. Insert the mechanical key into the side slot of the key fob, press the internal gray button, and with the other hand, push the rear end of the key upward. When a gap appears, you can remove the mechanical key. 2. Then, manually remove the rear end to replace the battery. After installing the new battery, reinsert the key bracket, completing the battery replacement. Below is additional information about remote keys: 1. How remote keys work: The key emits a weak radio wave, which is received by the car's antenna. The electronic control unit (ECU) identifies the signal code, and the system's actuator (motor or electromagnetic coil) performs the locking/unlocking action. 2. If the remote key gets wet, do not shake it vigorously or press any buttons, as this can cause water to seep into other critical circuits. Also, avoid using the remote to unlock the car immediately, as it may damage the circuit board. The correct approach is to open the key casing, lay it flat, and dry it with a hair dryer before further inspection.
Was this review help?
14
2
Share
OAugust
08/12/25 7:04am
I've been driving my old Mercedes-Benz SLC260 for years, and only discovered the battery was dead when the key stopped working last time. Doing it myself was really simple and saved money. The specific steps are: first locate the small notch on the side of the key, then gently pry open the casing using a coin or plastic card - be careful not to use too much force to avoid scratches. Inside you'll find a CR2032 coin battery; I carefully removed the old one with a screwdriver. When inserting the new battery, make sure to align the positive/negative directions correctly (usually positive side faces outward with clear markings). Then snap the casing back together with a click. Finally, test the unlock and ignition functions to confirm it works. The whole process takes less than 5 minutes, and the battery costs just a few bucks online. I always carry a spare just in case - regular maintenance helps extend the lifespan of older car keys.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

Where is the OBD port located on the BMW 3 Series?

BMW 3 Series OBD diagnostic port is located near the driver's footwell. Additional information about OBD is as follows: 1. OBD connects various emission-related component information to the Electronic Control Unit (ECU), which has the capability to detect and analyze emission-related faults. When an emission fault occurs, the ECU records the fault information and relevant codes, then alerts the driver via the malfunction indicator lamp. The ECU ensures access and processing of fault information through a standardized data interface. 2. The OBD system monitors multiple systems and components including the engine, catalytic converter, particulate filter, oxygen sensors, emission control system, fuel system, EGR, etc.
20
0
Share

What is the trunk size of the Ford EcoSport?

The EcoSport's trunk has a depth of 650-1500mm, a width of 980mm, and a height of 830mm. Here are some details about the EcoSport's trunk: 1. The side-opening tailgate is a distinctive feature of the EcoSport, making it more convenient to load large items. Before this, only the RAV4 and Tiggo among urban SUVs adopted this design. 2. The trunk space is very well-organized. The backrest of the rear seats can not only be folded forward, but the entire seat can also be flipped forward to increase the trunk's storage space. Such space expandability is outstanding among vehicles in the same class.
1
0
Share

How to Lift the Rear Seats of Audi Q5?

Audi Q5 rear seat lifting method: Reach your hand under the seat cushion, forcefully lift the front part upward until the front buckle is released. More information about Audi Q5 is as follows: 1. The Audi Q5 adopts the previous generation Audi family design, with an inverted trapezoidal grille featuring large rectangular grids and relatively square-shaped headlights. The overall body lines are predominantly smooth yet full of strength, making the generous and stable design more easily acceptable. 2. The lower edge of the Audi Q5's taillights is cut by a curved line, giving a strong sense of design. Combined with LED light groups, the lighting effect is cool and highly recognizable.
6
2
Share

What engine does WEY use?

WEY currently equips all three of its models with the 4C20NT engine. Here is some information about WEY's engines: 1. Currently, WEY has three models in its lineup: the VV5, VV7, and P8. Among them, the VV5 and VV7 are traditional fuel-powered vehicles, while the P8 is a plug-in hybrid model. 2. VV5 engine: Maximum power of 197 horsepower (145KW), maximum torque of 355 Nm. 3. VV7 engine: Maximum power of 197 horsepower (145KW), maximum torque of 355 Nm. 4. P8 engine: Maximum power of 234 horsepower (172KW), maximum torque of 360 Nm.
1
3
Share

How to Remove the Rear Bumper of a Sylphy?

Sylphy rear bumper removal method is as follows: 1. The rear bumper is secured by screws and clips. First, locate the fixing screws on the fender and remove them one by one, keeping the screws safe. 2. Then open the trunk, where there are fixing screws near the taillights that are quite hidden. It's recommended to use a flashlight to assist in locating and removing them. 3. After all screws are removed, only clips remain. Gently pull along the edge of the bumper outward, taking care to do it slowly to avoid breaking the plastic clips inside. Once separated, the bumper removal is complete.
19
1
Share

What is the engine displacement of the Avancier?

The Avancier comes with engine displacements of 1.5 liters and 2.0 liters. Below is a partial introduction to the Avancier's engines: 1. 2019 Avancier: Equipped with a 1.5-liter turbocharged engine, model code l15bd. This engine has a maximum power output of 142 kW, maximum torque of 243 Nm, maximum power speed of 5600 rpm, and maximum torque range of 2000 to 5000 rpm. 2. 2017 Avancier: Some models are equipped with a 2.0-liter turbocharged engine, model code k20c3. This engine has a maximum power output of 200 kW, maximum torque of 370 Nm, maximum power speed of 6500 rpm, and maximum torque range of 2250 to 4500 rpm.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.