How to Replace the Battery in an Older Mercedes-Benz G63 AMG Key?

3 Answers
LaAlivia
07/24/25 3:12pm
The back of the older Mercedes-Benz G63 AMG key has a button. Press this button and slide the back cover forward to open the key. The battery is located in the adjacent slot. Be sure to note the battery model for the key. Most Mercedes key batteries are model 3V CR2025. After opening the slot, remove the old battery and replace it with a new one. Here is more information about Mercedes keys: 1. Mercedes has used three generations of car keys over the past twenty years. The key design is not related to the vehicle model or series. For example, keys for C-Class, E-Class, and S-Class are essentially the same within the same era, and the battery replacement method is also similar. 2. For Mercedes keys from 2006 to 2013, first flip open the tab at the rear end of the key to remove the mechanical key. Insert the mechanical key into the slot where the tab was and apply slight pressure to pop open the back cover. Then remove the depleted old battery, replace it with a new one, and close the back cover.
Was this review help?
15
2
Share
NorahFitz
08/10/25 7:18am
I'm quite familiar with replacing the battery in an old Mercedes G63 AMG key. Last time my car key ran out of battery, it took me a while to figure it out. First, prepare your tools—find something thin and flat like a small screwdriver or a credit card, gently insert it into the key's seam, and slowly pry open the shell. Don’t use too much force, or you might scratch the plastic. Once opened, you’ll see a small round coin battery inside, usually a CR2032 model—just grab a new one from the supermarket. When removing the old battery, pay attention to the positive and negative sides; take a photo to remember the orientation to avoid putting it in backward. Align the new battery correctly, press it gently to ensure good contact, then close the shell and press firmly. Finally, test the remote function by pressing the lock button to see if the light turns on. If it doesn’t respond, reinstall the battery. The whole process takes about five minutes, but be patient—use soft tools to avoid scratching the key. After replacement, the battery should last one to two years. Just make sure to stock the right battery model and don’t buy the wrong one.
Was this review help?
4
5
Share
Expand All
LeFelicity
09/25/25 7:18am
I often help friends replace key batteries when playing with cars, and it's quite simple for older models like the G63. First, prepare a new CR2032 button battery, which you can easily buy online or at an auto parts store. Find a quiet place to work, and use a thin tool like a bank card or a specialized tool to gently pry open the side gap of the key. Remove the old battery after opening the shell, and remember which side was facing up or take a photo with your phone to avoid incorrect orientation. Insert the new battery, align it with the slot, and press it gently into place. When closing the shell, make sure it snaps shut without any gaps. Finally, press the key button to test the locking effect—if it works normally, you're done. It's recommended to check the key's battery level monthly to avoid running out of power unexpectedly. The whole process costs just ten bucks, and anyone can learn it. Avoid using sharp metal tools as the plastic shell is fragile—take it easy, just like assembling Lego toys.
Was this review help?
5
5
Share
Expand All
More Forum Discussions

What is the emission standard for cars in 2006?

2006 cars could meet either China II or China III emission standards. Here are the relevant details: 1. China II: The abbreviation for the National Phase II emission standard, equivalent to Euro II standards, meaning the exhaust pollutant levels match Euro II requirements. 2. Regulation: According to the State Environmental Protection Administration's "Announcement on Implementing National Phase II Motor Vehicle Emission Standards," starting from September 1, 2003, all newly designed heavy-duty vehicles were required to comply with National Phase II type-approval emission limits equivalent to Euro 2 standards.
13
4
Share

What does the hold button in the car mean?

The hold button on the vehicle means hold. After pressing the hold button, the automatic transmission is in hold mode, and the hold mode indicator light on the dashboard lights up. The hold button adjusts the optimal driving state according to different driving conditions, effectively preventing the transmission from shifting frequently, and plays the role of forced downshifting and not upshifting when overtaking. The situations for using the hold button are: 1. When starting on snow, place the gear lever in the 2nd gear position and press the hold button, the transmission will maintain the gear ratio at 2nd gear, making the start smoother; 2. When driving on continuous curves, press the hold button in D4 gear, the transmission will maintain 3rd gear, which can continuously output greater torque, improve acceleration performance, and make driving smoother; 3. When driving on mountain roads or continuous slopes, press the hold button in D4 or 2nd gear to enter hold mode, making acceleration more powerful when going uphill and providing greater resistance and safety when going downhill, avoiding wear caused by frequent shifting of the transmission.
20
3
Share

How Long to Wait Before Rescheduling After Failing Subject 3

Subject 3 exam retakes can be scheduled 10 days after a failed attempt. Below are key details about Subject 3 testing: 1. Test components: Vehicle preparation, lighting simulation test, starting off, straight-line driving, gear shifting operations, lane changing, roadside parking, proceeding straight through intersections, left/right turns at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, oncoming vehicle handling, overtaking, U-turns, and nighttime driving. 2. Retake policy: According to China's driver's license regulations, candidates have five total attempts for Subject 3. Failure to pass after five attempts invalidates all previous test results, requiring complete re-registration starting from Subject 1.
4
0
Share

Is Wheel Alignment Necessary When Replacing Shock Absorbers?

Replacing shock absorbers does not require a wheel alignment. Here are the reasons why wheel alignment is unnecessary when replacing shock absorbers: 1. Limitations of Wheel Alignment: The front wheels in a wheel alignment can generally only adjust the front wheel toe-in, while parameters such as caster angle, kingpin inclination, and front wheel camber are typically set at the factory and cannot be adjusted afterward. 2. Self-Adjustment Capability of Shock Absorbers: When replacing shock absorbers, the entire connection between the vehicle's front suspension and the wheel hub needs to be disassembled. However, the length of the tie rod, which affects the front wheel toe-in, remains unchanged. After replacing the shock absorbers and reinstalling the tie rod, its relative position will return to its original state.
3
4
Share

Which is More Fuel-Efficient, Cars with T or Without T?

Cars with T naturally represent better fuel efficiency. Here are some measures to improve fuel efficiency: 1. Control RPM: While driving, the optimal engine RPM for most fuel-injected cars is around 2200–2500. Regardless of the gear, maintain the engine RPM within this range. Too low RPM will make the car sluggish, consume fuel without moving, and damage the engine; too high RPM increases unnecessary fuel consumption and also harms the engine. 2. Maintain Speed: The most fuel-efficient driving condition is maintaining a constant speed in a straight line. The most fuel-efficient speed for small-displacement cars is 60–80 km/h, while for medium-displacement cars, it is 80–100 km/h. Driving at the economic speed ensures the best fuel efficiency.
15
3
Share

What happens if you drive on the highway without a driver's license?

The Article 95 of the Road Traffic Safety Law stipulates: If you forget to bring your driver's license on the highway, according to the road traffic law, you will be deducted 1 point on your license and fined. To avoid this situation, before driving on the highway, be sure to check various conditions of your car. Below are the basic checks before driving on the highway: 1. Check if the windshield washer fluid is depleted and if the wipers are functioning properly; 2. Ensure the brakes, handbrake are reliable, the brake fluid is normal, and the spare tire's pressure is correct; 3. Inspect the tires for nails and use a tire pressure gauge to test the tire pressure.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.