How to Replace the Battery in an Emgrand Car Key?
3 Answers
Method to replace the battery in an Emgrand car key: Use a small screwdriver to pry open the remote control shell, then replace the old battery with a new one, ensuring the positive pole of the battery faces downward. The Geely Emgrand is one of the automotive brands launched by Geely Auto, with various models including the GL, GS, and New Emgrand. Among them, the EC718 is the first B-class sedan in a three-box version from Geely. This model was initially equipped with a 1.8L CVVT engine and later upgraded with the Geely 4GN series DCVVT gasoline engine, featuring a dual variable valve timing system for both intake and exhaust. It delivers a maximum torque of 172 Nm and a maximum power of 138 kW. The dimensions of the EC718 are 4544mm in length, 1832mm in width, and 1671mm in height, with a wheelbase of 2660mm.
I've been driving an Emgrand for several years and have encountered the issue of a dead key fob battery a few times. Changing the battery yourself is simple, saving both time and money. There's usually a small back cover on the rear of the key fob - just use a small screwdriver or coin to gently pry it open. Inside, you'll find a CR2032 coin cell battery. When removing the old battery, be careful not to pull too hard to avoid damaging the circuit. A new battery costs just a few dollars at the supermarket. When inserting the new battery, make sure the positive side faces upward. After securing the back cover, test the buttons to ensure they're working properly. I recommend keeping a spare battery in your car and checking the battery level every two years to prevent unexpected situations. The whole process takes about five minutes, and once you learn how to do it, you won't need to frequently visit repair shops.
As an Emgrand owner, replacing the key battery is really not difficult. The key back cover is ingeniously designed - just gently pry it open with a fingernail or thin card. After removing the small CR2032 battery inside, replace it with a new one, remembering to place the plus side facing up. Avoid using excessive force during the process to prevent scratching the plastic casing. After replacement, test the lock/unlock buttons to confirm functionality. Cost-wise, the battery only costs a few yuan each, while going to a shop might be expensive and inconvenient. The DIY process takes just ten minutes, saving time while developing hands-on skills. For prevention, be prepared to replace it when the key signal weakens after prolonged use.
