How to Replace the Battery in a Wuling Hongguang S Key?

[VonJosephine]

To replace the battery in a Wuling Hongguang S key, follow these steps: 1. Use a flat-head screwdriver to gently pry open the slot area, lifting the casing. You can then open it along the gap created by prying. 2. Next, use a Phillips screwdriver to remove the two fixing screws and open the battery cover. 3. Inside, you will find a CR2032 coin cell battery. Remove the old battery and replace it with a new one. Here is an introduction to the remote key: 1. Working Principle: The remote key is used to lock and unlock the car doors via radio waves, functioning as a smart lock. It operates by emitting weak radio waves, which are received by the car's antenna to perform the actions. 2. Technological Upgrade: The 3rd-generation key combines the remote key and mechanical key into one. Both locking/unlocking the car doors and starting the car engine are done via the remote buttons on the car key. The mechanical key is stored inside the remote key for use when the remote key's battery is low.

[DaisyMarie]

When I previously replaced the battery for my Wuling Hongguang S key, I found the whole process quite straightforward. The first step is to locate the seam on the side of the key and gently pry open the casing using a small coin or flathead screwdriver—just don’t use too much force to avoid damage. Then, carefully remove the old battery and check its model, which is usually a CR2032 coin cell, so you don’t buy the wrong one. When inserting the new battery, make sure the positive and negative sides align correctly with the slot—don’t put it in backward. Finally, snap the casing back together and press firmly to ensure a snug fit. Replacing the battery yourself not only saves money but also time—it takes less than five minutes. Checking the battery level annually can prevent malfunctions and avoid the hassle of the car not starting. If you use the key frequently, it’s a good idea to keep a spare battery in the car just in case.

[EleanorFitz]

As a hands-on DIY enthusiast, I often help friends replace car key batteries. For the Wuling Hongguang S key, there's usually a small gap in the casing. Use a thin screwdriver or a dedicated prying tool to gently insert and slowly open it, being careful not to scratch the plastic. After removing the old battery, confirm the model—it's most likely a CR2032, which can be bought for a few dollars at supermarkets or online stores. When placing the new battery, ensure the positive side faces up, press it firmly, and then reassemble the key. After replacement, press the key button to check if the signal light comes on—if it does, you've succeeded. Doing it yourself is much cheaper than going to the dealership, saving you dozens of dollars each time, and it's a fun way to pick up some minor repair skills. Regular maintenance can also extend the key's lifespan and reduce the risk of unexpected malfunctions.

[Grace]

As a female owner who frequently drives the Wuling Hongguang, I found replacing the key battery isn't as difficult as imagined. There's a small slit on the back of the key - just gently pry it open with a coin to reveal the battery, then use your fingernail to pop it out. The new battery is typically a CR2032 model, easily available at any convenience store. Simply insert it into position. Snap the case shut with a press, and the whole process takes just 2-3 minutes without worrying about damage. I routinely check the key signal every six months to prevent unlocking issues when parking. DIY is both quick and convenient.