How to replace the battery in a Wuling Hongguang mini key?

1 Answers
LaCamilla
07/30/25 12:00am
Find a coin and insert it into the key slot to use as a tool to pry open the key cover. With the side bearing the logo facing upwards, gently lever it open using the tool. To replace the battery in the key, use a flathead screwdriver to carefully pry the slot area, lifting the casing. Follow the gap created by prying to fully open it.
Was this review help?
2
3
Share
More Forum Discussions

Why does the air conditioning pressure switch of the new Santana keep burning out?

Car air conditioning pressure switches are essential control components that ensure the proper operation of the car's air conditioning refrigeration system. Pressure control can be categorized into high, medium, and low levels, and further divided into 2, 3, or 4-wire configurations. High and low-pressure switches control the start and stop of the compressor when abnormal pressure occurs in the system. The control range of the high-pressure switch is generally between 15-26 bar, while the low-pressure switch operates within 0-4 bar. The medium-pressure switch, typically set at 17 bar, controls the high and low speeds of the condenser fan. Below is additional information on air conditioning pressure: 1. Pressure temperature sensor: This refers to a sensor that can detect temperature and convert it into an available output signal. Temperature sensors are the core components of temperature measurement instruments and come in a wide variety. Based on measurement methods, they can be divided into contact and non-contact types, and according to sensor materials and electronic component characteristics, they are classified into thermal resistors and thermocouples. 2. Loss of protection: If the high-pressure switch loses its protective function, the system may experience issues such as pipe bursts, belt slippage, and engine stalling. If the low-pressure switch fails, in cases of system leakage, foreign objects or water may enter the system, causing irreversible damage to the refrigeration system.
2
3
Share

Where is the chassis number of Pagani?

Pagani's chassis number is generally located at the lower left corner of the front windshield, or on the driver's side door hinge pillar, door lock pillar, door edge, and may also be found in the engine compartment. The specific location varies depending on the model. The chassis number is also known as the VIN (Vehicle Identification Number) code. VIN is the abbreviation for Vehicle Identification Number. Below is an introduction to the automotive VIN code: 1. Composition of the VIN code: The VIN code consists of 17 characters (including English letters and numbers), commonly referred to as the seventeen-digit code. It is a unique set of characters assigned by the manufacturer to identify a vehicle. The generation of this number follows specific rules, corresponding uniquely to each vehicle and ensuring no duplication worldwide within fifty years. Therefore, it is often referred to as the car's ID. 2. Regulations related to the VIN code: Governments and automotive companies have specific regulations for the 17-digit identification code of vehicles produced in their country or by their company. Technical regulations in various countries generally stipulate only the basic requirements for the vehicle identification code, such as it should consist of 17 digits, with specific dimensions, writing forms, arrangement positions, and installation positions for letters and numbers. Except for mandatory regulations on the meaning of certain symbols, others are not strictly regulated and are left to the manufacturer's discretion. The vehicle identification code often contains information about the vehicle's manufacturer, production year, model, body type, engine, and other equipment.
5
1
Share

What are the dimensions of the Front Lander in terms of length, width, and height?

Toyota Front Lander measures 4740/1855/1660 mm in length, width, and height respectively, with a wheelbase of 2690 mm. Appearance of the Front Lander: Unlike the Corolla Cross, the Front Lander adopts the exterior styling kit of the Japanese version Corolla Cross. The front bumper, along with the large grille, features a narrow strip around the emblem. The base model does not come with full LED headlights, while the high-end model's headlight housing includes an LED strip dividing the upper and lower sections. Additionally, the vehicle offers optional black roof and silver trim for added personality. Built on the TNGA-C platform, the Front Lander is positioned as an entry-level compact SUV with body dimensions of 4485/1825/1620 mm and a wheelbase of 2640 mm, showcasing rich side profile lines. Powertrain of the Front Lander: Under the hood, the Front Lander is equipped with the class-leading TNGA 2.0L Dynamic Force Engine paired with a Direct Shift-CVT transmission, forming a golden powertrain combination. It delivers a maximum power of 126 kW with a combined fuel consumption of just 5.8L/100km, balancing strong performance with low fuel consumption.
17
1
Share

What is the difference between advanced fully synthetic oil and fully synthetic oil?

Advanced fully synthetic oil and fully synthetic oil mainly differ in performance, with the specific differences as follows: 1. Oxidation resistance: Advanced fully synthetic oil has approximately 25% better oxidation resistance than regular fully synthetic oil, more effectively preventing oil oxidation and degradation, thereby extending the oil change interval. 2. Dispersancy: Advanced fully synthetic oil features top-tier detergency and dispersancy, significantly reducing deposit formation, preventing engine wear, maintaining strong engine performance, and lowering fuel consumption. 3. Higher viscosity index: Advanced fully synthetic oil has the widest viscosity range and a higher viscosity index, providing excellent anti-wear protection for engines even under extremely harsh conditions (such as racing), reducing engine wear, and extending engine lifespan.
4
1
Share

Why does it show low tire pressure when there is still air?

There might be a slow leak in the tire. You can reset the tire pressure monitoring system and observe further. Below are the specific functions of tire pressure monitoring: 1. Prevent accidents: The tire pressure monitoring system is an active safety device that can alert the driver in time when there are dangerous signs in the tires, prompting them to take appropriate measures to avoid serious accidents. 2. Extend tire lifespan: It ensures that the tires always operate within the specified pressure and temperature range, thereby reducing tire damage and extending their service life. 3. Improve driving economy: When the tire pressure is too low, it increases the contact area between the tire and the ground, thereby increasing friction resistance. When the tire pressure is 30% below the standard value, fuel consumption will increase by 10%.
15
1
Share

Turn Off the Engine First or Unbuckle the Seat Belt First?

Turn off the engine before unbuckling the seat belt. Here is an introduction to seat belt-related content: 1. Function: The seat belt functions to restrain movement and provide cushioning, absorbing impact energy and mitigating inertial forces to prevent or reduce the severity of injuries to drivers and passengers. Car accident investigations show that wearing a seat belt can reduce fatalities by 57% in frontal collisions, 44% in side collisions, and 80% in rollovers. 2. Principle: When a strong frontal collision occurs, the driver and passengers' bodies move forward rapidly due to inertia. At this point, the seat belt will exert force to "hold back" the bodies, absorbing part of the impact energy while the airbags inflate and fully deploy.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.