How to Replace the Battery in a Volkswagen Lavida Key?

1 Answers
DiCali
07/29/25 12:23pm
Method for replacing the battery in a Volkswagen Lavida key: There are two screws on the back cover of the car key. Use a screwdriver to remove each screw, then open the back cover to reveal the battery panel. Remove the old battery and install the new one. Reattach the back cover and tighten the screws. Driving the Volkswagen New Lavida: 1. Body dimensions of the Volkswagen New Lavida: The Lavida comes in sedan and hatchback versions. The sedan version measures 4670 mm in length, 1806 mm in width, and 1474 mm in height, with a wheelbase of 2688 mm. The hatchback version measures 4541 mm in length, 1806 mm in width, and 1488 mm in height, with a wheelbase of 2688 mm. 2. The Volkswagen New Lavida is a compact car under the Volkswagen brand, equipped with three engines: a 1.2-liter turbocharged engine, a 1.4-liter turbocharged engine, and a 1.5-liter naturally aspirated engine.
Was this review help?
9
5
Share
More Forum Discussions

What is the displacement of BMW?

BMW has different displacements depending on the model, such as BMW 730, 740, 750, 760, where 30, 40, 50, 60 represent engine displacements of 3.0, 4.0, 5.0, and 6.0L respectively. Engine displacement: If an engine has multiple cylinders, the total working volume of all cylinders is called the engine displacement, expressed in liters (L). Vehicle displacement identification: Most domestically produced cars have a model number consisting of pinyin letters and Arabic numerals at the rear. The middle two digits indicate the engine displacement of that model. For example, "08" means an engine displacement of 0.8 liters, "20" means 2.0 liters, and "16" means 1.6 liters.
2
3
Share

How to Adjust the Seat Backrest?

The method to adjust the seat backrest is as follows: 1. Turn the adjustment knob on the left side of the seat according to the driver's physique, with a maximum tilt of one to two segments; 2. When adjusting, use the force of your back to set the backrest angle until your palm can firmly press the upper part of the steering wheel; 3. Adjust the seat backrest angle so that it supports your lower back, ensuring your lower back does not hang in the air when leaning back. This helps reduce fatigue during driving. When the driver leans against a backrest tilted at 100 degrees, the body is slightly reclined, which naturally aligns with the slight backward curve of the waist. Additionally, the raised design of the car seat's lumbar support area helps reduce pressure on the lower back.
9
2
Share

Where is the preheating relay of Qingling Isuzu pickup truck located?

On the right side of the engine compartment, next to the fuse box, a black square-shaped component is the preheating relay. Function of the preheating relay: The preheating relay is an electromagnetic relay used for the preheater. When the temperature sensor of the construction machinery detects that the temperature is too low, the computer controlling the construction machinery will send a voltage to the relay, thereby connecting the power supply to the preheater. When the temperature rises, the relay disconnects the power supply. Introduction to relays: A relay, also known as an electrical relay, is an electronic control device that consists of a control system (also called the input circuit) and a controlled system (also called the output circuit). It is commonly used in automatic control circuits.
1
4
Share

What causes the steering wheel noise in BMW X1?

The main reasons for steering wheel noise in BMW X1 are: Unlubricated steering column with high friction, lack of power steering fluid, universal joint failure, aging and hardening of suspension stabilizer link bushings, and damaged wheel bearings. During subsequent driving, pay attention to the following points: Avoid turning the steering wheel while stationary: Avoid turning the steering wheel when the vehicle is stationary; try to steer only after the vehicle starts moving. When parked, always return the steering wheel to the center position to prevent unnecessary stress on the suspension system and tires. Avoid full-lock steering: When making U-turns, try to avoid turning the steering wheel to its extreme positions.
7
1
Share

What tires does the Aion LX use?

Aion LX uses tire specifications of 245/55R19 and 245/50R20, and owners can choose the appropriate tires based on their actual needs. In the tire model 245/55R19, 245 refers to the tire's cross-sectional width of 245mm, 55 indicates the tire's aspect ratio of 55, and R19 means the diameter of the wheel rim paired with this tire is 19 inches. This tire has a relatively large width, a moderate aspect ratio, and a large wheel rim diameter, which contributes to better handling performance and suitability for most road conditions, making it commonly equipped on SUVs. The Aion LX's body dimensions are 4786mm in length, 1935mm in width, and 1685mm in height, with a wheelbase of 2920mm.
16
1
Share

What are the body dimensions of the Aion LX?

Aion LX has body dimensions of 4786mm in length, 1935mm in width, and 1685mm in height, making it a mid-size SUV. In terms of power, the Aion LX is equipped with a permanent magnet synchronous motor across all variants, available in versions with 184 horsepower, 204 horsepower, and 408 horsepower. Regarding range, the Aion LX offers three versions with ranges of 503km, 650km, and 600km. For safety features, the Aion LX comes standard with front and side airbags, front and rear head airbags, tire pressure monitoring system, ISOFIX child seat anchors, ABS anti-lock braking system, electronic brakeforce distribution, brake assist, traction control, and electronic stability control. In terms of other features, the Aion LX includes standard LED headlights, GPS navigation system, among others.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.