···
Log in / Register

How to Replace the Battery in a Volkswagen CC Key?

3 Answers
VonDawson
07/29/25 8:57am
There is a rectangular button on the left side of the key. Press it firmly, and the spare key will pop out. Then, remove the spare key. At the top of the key, along the connection between the black plastic and the top cover plate, use your thumb to push the top cover plate firmly until you hear a click, then remove the top cover plate. On the back of the key, you can use a metal or plastic tool to gently pry open the connection at the plastic shell. Use a toothpick or a paperclip to gently lift the battery, then remove it by hand and install a new coin cell battery.
Was this review help?
7
0
Share
StellaLee
08/12/25 7:43am
I previously helped a friend replace the battery in their Volkswagen CC key, and the process was quite straightforward. First, you need to confirm the key model—older CC models usually have a folding key, while newer ones might feature a push-to-start design. Get a CR2032 coin cell battery, which is available at convenience stores or hardware shops. Use your fingernail or a small blade to gently pry open the key casing from the side seam, being careful not to break the clips. Once the battery compartment is exposed, remove the old battery and insert the new one with the positive side facing up. You’ll hear a click when it’s securely in place. Finally, snap the cover back on and press firmly, then test the remote locking function. The whole process requires no tools, takes about five minutes, and can save you around a hundred bucks in dealership labor costs.
Was this review help?
20
2
Share
Expand All
StCaleb
10/06/25 2:49am
The key to replacing the battery in a Volkswagen CC is identifying the correct model and location. Older models use a CR2032 battery, while some newer ones use CR2025. First, press the small button on the back of the key to remove the mechanical key. Then, use a coin to twist the shell counterclockwise half a turn at the groove to open it. The battery compartment is under the circuit board, secured by a metal spring clip—pinch both sides to remove the old battery. When installing the new battery, ensure the positive side faces up to avoid reverse installation. During reassembly, remember to reinsert the mechanical key before snapping the shell back together. It's recommended to replace the battery annually to prevent sudden failure, and keeping a spare battery in the car for emergencies is a good idea.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to Manually Deactivate the MG 3 Anti-Theft System?

First, locate the wiring distribution of the anti-theft system, which is generally found beneath the steering wheel or inside the protective panel under the A-pillar. Then, simply disconnect the input wire of the anti-theft device, rendering it ineffective at this point. Some anti-theft devices are equipped with fuse protection. In such cases, you need to locate the corresponding fuse position and remove it, effectively deactivating the car's anti-theft system.
17
3
Share

What to Do When the Motorcycle Engine Makes a Ticking Sound?

If there is abnormal noise at the moment of starting, and the noise disappears when the engine is idling after starting, then the fault point is likely the carbon brushes inside the starter motor. If there is abnormal noise when the engine is idling after starting, the fault point is likely due to excessive clearance between the hydraulic tappets and valves inside the engine cylinder head.
1
0
Share

How to Calculate the Fuel Consumption per 100 Kilometers for a Motorcycle?

The owner should first record the odometer reading L1 when the fuel level is high and the engine cuts off due to low fuel. Then, note down the amount of fuel YL added during refueling. When the fuel is again used up to the high fuel level cutoff point, record the current odometer reading L2. Subtract L1 from L2 to get the distance traveled, then divide this by Y to obtain the number of kilometers the motorcycle can travel per liter of fuel in actual driving conditions.
7
2
Share

How to Check After Annual Vehicle Inspection?

With the advancement of internet-based services, the traffic management department has launched an app called 'Traffic Management 12123', which can be downloaded and installed from major app stores. You can also visit the vehicle management office to inquire. Bring your ID card, driver's license, and vehicle registration certificate to the violation handling hall, submit the documents to the staff, and you can check for free.
4
1
Share

What to Do When a Motorcycle Won't Start After Running Out of Fuel?

If it's an electric start, check if the battery has power. You can try jump-starting with a new battery's connection cables. If it starts, it means the battery was low on charge. For motorcycles, gasoline serves as the combustion energy source. The checking method is to switch the fuel valve to the reserve tank, or you can disconnect the fuel line and shake the bike.
17
3
Share

What is the correct sequence for starting the ignition?

Turn the ignition key clockwise to the START position. Apply slight forward pressure to rotate it. Release immediately when the engine starts, as the ignition switch will automatically return from the start position to the normal ignition position. After the engine starts, observe the instrument panel indicators and check for any abnormal engine noises, water leaks, or oil leaks. If the engine fails to start after three attempts, identify and resolve the issue before attempting to start again.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.