How to Replace the Battery in a Vision X6 Key?

1 Answers
MacKyle
07/29/25 9:38pm
The steps to replace the battery in a Vision X6 key are: 1. Press the smart key switch and remove the mechanical key; 2. Use a flat-head screwdriver or similar tool to pry open the remote control casing; 3. Remove the old battery, place the new battery into the compartment with the positive pole facing downward (positive side down), then reattach the cover to complete the replacement. The Vision X6 is a compact SUV under Geely, with dimensions of 4546mm in length, 1834mm in width, and 1715mm in height, and a wheelbase of 2661mm. The Vision X6 is equipped with safety features such as full-speed ACC adaptive cruise control, a 360-degree 3D panoramic imaging system, an 8-in-1 Bosch ESP electronic stability program, and a comprehensive safety warning system.
Was this review help?
13
4
Share
More Forum Discussions

How to Lift Car Wiper Blades Up?

Method to lift the vehicle's wiper blades: 1. Start the vehicle; 2. Turn off the engine again, and within one minute after shutting down, quickly push the lever on the right side of the steering wheel upward twice; 3. The wiper blades will then stay in the upward position, entering maintenance mode; 4. Next, you can manually lift the wiper blades until they are perpendicular to the car, completing the operation of standing the wiper blades up. Wiper maintenance methods are as follows: 1. Regularly replenish the windshield washer fluid in the reservoir. Due to prolonged non-use, wiper blades may become deformed under pressure, leading to issues like shaking, noise, and incomplete cleaning during the first few operation cycles. These problems typically disappear after continuous use. 2. After each use of the wipers, it's advisable to lift the wiper arms once after parking, and it's best to return the wipers to their original state. When the blades are almost perpendicular to the glass, it can reduce the probability of rubber deformation.
13
0
Share

What car has a key that resembles a card?

The car with a key resembling a card is the Tesla Model 3. The backup unlocking key for the Tesla Model 3 is a card similar to a bank card, as the Model 3 does not come with a traditional car key but instead utilizes a smartphone for control. Here are some relevant details about the Tesla Model 3: 1. The Tesla Model 3 is positioned as a mid-size sedan. It features a 4-door, 5-seat sedan design with no exhaust pipe at the rear and a front-mounted trunk. The vehicle is equipped with a single-speed transmission powered by a 462-horsepower motor, delivering a total torque of 639 Nm and a maximum power output of 340 kW, achieving 0-100 km/h acceleration in just 5.6 seconds. 2. The Model 3 incorporates an EPS (Electric Power Steering) system with two key functions: variable damping and variable steering ratio. It also features hidden door handles, and all in-car systems and vehicle controls are managed through a large central touchscreen.
5
3
Share

Where is the Bluetooth button located in the 2013 Buick GL8?

2013 Buick GL8 Bluetooth button is located within the display screen of the car's rearview camera. Below is a detailed introduction about the Buick GL8: 1. Overview: The Buick GL8 has undergone five generations of innovation since its debut in 1999. The Buick GL8 family has successively launched three major series: the all-new Buick GL8 Avenir Avenir family, GL8 ES Land Baron, and GL8 Land Business Class, offering users more diversified choices. 2. Others: The vehicle weight ranges from 1880 to 2000kg. The wheelbase is 3088mm. The vehicle dimensions are 5219/1878/1776mm-5238/18787/1805mm. The trunk volume ranges from 475 to 1650 liters. The fuel consumption is 7.8 to 7.9L/100km. The fuel tank capacity is 66 liters or 70 liters. The engine type is turbocharged. The top speed is 195km/h.
5
4
Share

Should the accelerator be pressed during the uphill section of Subject 2?

There are two versions for the hill start in Subject 2: one requires pressing the accelerator (needs throttle), while the other does not (no throttle needed). 1. No-throttle version: After stopping at the designated point, turn on the indicator light, then slowly lift the clutch with the left foot (semi-engaged state). At this point, the car body will shake, creating a forward tugging sensation. Hold the clutch steady without releasing it further, then release the foot brake directly, and the car will move uphill. 2. Throttle version: Similarly, first press the clutch with one foot and the brake with the other. Slowly release the clutch with the left foot while keeping the handbrake engaged until the car body shakes and reaches the semi-engaged point. Pause the clutch-lifting action, then smoothly release the brake with the right foot and gently press the accelerator. This step is crucial. At this point, observe the tachometer needle; when it reaches around 1000 RPM, release the handbrake, gently press the accelerator, and the car will drive up to the hilltop. Finally, fully release the clutch.
9
2
Share

From which day does the first maintenance period start?

Car first maintenance date is calculated from the day of vehicle delivery. The running period after delivery is generally around 3 months or 3,000 kilometers. Different car brands have different requirements; you can refer to the manual. More information about car first maintenance is as follows: 1. After a new car is delivered, the 4S store usually requires the owner to perform the first maintenance within 3,000 kilometers. In fact, the car manufacturer requires the owner to complete the first maintenance within 5,000 kilometers. Therefore, you should not exceed 5,000 kilometers before getting the first maintenance. 2. If the car is driven less and it takes a long time to reach 3,000 kilometers, then the first maintenance should be done within three months. When buying a car, salespeople often mention how many free maintenance services they offer. In fact, the first maintenance is already free, so it doesn't count as a 'gift.' If they offer three free maintenance services, then including the first one, you get four free maintenance services in total. 3. For the first maintenance, changing the engine oil and oil filter is sufficient. If the 4S store suggests other paid maintenance services, you can decline them. Of course, free checks like tire pressure and lighting must be done.
18
3
Share

What is the fuel consumption of the 2008 Mondeo Zhisheng 2.3?

The actual fuel consumption of the 2008 Mondeo Zhisheng is approximately 14L per 100 kilometers. The fuel consumption of a car varies slightly depending on each individual's driving habits and skills. A smoother driving habit results in lower fuel consumption, while frequent aggressive driving, overtaking, or high-speed operations will appropriately increase this consumption. Below are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance will require higher fan speeds and lower temperatures to achieve a comfortable effect. 2. Frequent sudden braking: Frequent sudden braking is the main reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement cars: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately upon entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.