How to Replace the Battery in a Tiida Car Key?

1 Answers
SanLyla
07/28/25 6:01pm
Nissan Tiida key battery replacement method is as follows: 1. Tools needed: a flathead screwdriver and a piece of cloth. Pull out the spare key. Pry it open, and when prying, wrap the screwdriver head with a cloth to avoid damaging the opening. Then remove the old battery and replace it with a new one, and reassemble the parts as they were. 2. The remote key utilizes the wireless remote function of the central locking system, allowing you to unlock and lock the doors from a distance without inserting the key into the lock. The working principle is simple: the key emits a weak radio wave, which is received by the car's antenna. The electronic control unit (ECU, Electronic Control Unit) identifies the signal code, and then the system's actuator (motor or electromagnetic coil) performs the locking/unlocking action.
Was this review help?
10
3
Share
More Forum Discussions

Where Can a Car Without a Sunroof Leak?

Cars without sunroofs can leak from the following areas: 1. At the door and trunk openings: This usually happens due to issues with the waterproof seals, such as deterioration, aging, or breakage of the rubber seals. Rainwater can seep in through these gaps. Reapplying a specialized adhesive for waterproof seals can completely prevent leaks. If water is leaking around the door, it is often due to the surrounding waterproof seals—check for any breaks or peeling. 2. Clogged drainage pipes causing interior leaks: The most common cause of interior leaks is clogged drainage pipes under the front windshield. Lack of regular cleaning or prolonged parking under trees can lead to dust, leaves, and mud being washed into the drainage pipes by rainwater, eventually clogging them. This obstructs proper drainage, causing rainwater to backflow into the car during heavy rain. 3. Failed floor grommets causing leaks: While rainwater usually leaks from above, it can also seep in from below due to faulty floor grommets. The floor has several holes where grommets are embedded from above. If these grommets become misaligned, the interior becomes directly connected to the ground, allowing rainwater to seep in from below during heavy rain.
16
3
Share

Can I get an annual inspection without a vehicle license?

No, you cannot get an annual inspection without a vehicle license. The required documents for an annual inspection include: the original copy of the compulsory traffic accident liability insurance certificate (duplicate); the safety technical inspection certificate (provided by the vehicle inspection station); the original vehicle license; the tax payment certificate for vehicle and vessel use tax; and the original ID card of the vehicle owner (if a proxy is handling the process, the proxy's ID card is also required). The procedure for annual inspection: First, after submitting the inspection application, the vehicle must undergo an online inspection. The vehicle is driven into the automatic inspection area, where emissions, speed, lights, side slip, and chassis are tested to ensure they meet the standards. Only if all items pass can the vehicle proceed. Next is the appearance inspection, which verifies the vehicle's license plate, type, body color, engine number, VIN code, and frame number. Then, the body appearance is checked, including details such as the bumper, engine compartment, rearview mirrors, lower mirrors, window glass, paint, engine operation status, and the interior of passenger vehicles and wheels. Finally, the vehicle owner can obtain the inspection report and application form from the inspector. If all inspection items pass, the owner can proceed to pay the inspection fee and collect the vehicle license and compliance label. If any items fail, the owner must repair the vehicle and undergo a re-inspection until all items pass before proceeding with the visa process. Notes for annual inspection: During the annual inspection, the vehicle management office will check the vehicle's lights. If the lights are found to be too dim or too bright, the vehicle will be deemed unqualified and will not pass the annual inspection. If the lights are too dim, check the wiring and bulbs for aging and replace the relevant parts if necessary. If xenon headlights have been installed, it is recommended to restore the original headlights before the annual inspection to pass the test.
5
3
Share

What are the differences between V80 and V90?

Differences between V80 and V90: 1. Vehicle class: V80 belongs to light passenger vehicles, while V90 is a microcar. 2. Price: V90 is more expensive compared to V80. 3. Displacement: The Maxus V80 is equipped with a 2.5T diesel turbocharged engine, with a maximum power of 136 horsepower and a maximum torque of 330N/m, meeting either China V or China VI emission standards. The Maxus V90 is equipped with a new 2.0T SAIC π diesel engine, with a maximum power of 150 horsepower and a maximum torque of 375N/m, meeting China VI emission standards. 4. Drive system: V80 only has front-wheel drive, while V90 offers both front-wheel drive and rear-wheel drive. 5. Configuration: V90 has higher configurations than V80.
4
2
Share

Is the vehicle license handled at the 4S store when buying a new car?

When purchasing a new car, the vehicle license can be processed at the 4S store. Below is relevant information about the vehicle license: 1. Introduction: The motor vehicle license is the legal document permitting a motor vehicle to drive on roads within China. The license consists of three parts: the document, main page, and supplementary page. The front of the main page contains the endorsed certificate core, while the back features a photo of the vehicle, all sealed in a plastic cover. 2. Main Page: The text on the front of the main page is in black. The phrase 'People's Republic of China Motor Vehicle License' is in 12pt bold font, centered. Other texts include 'License Plate Number', 'Vehicle Type', 'Usage Nature', 'Owner', 'Address', 'Brand Model', 'Engine Number', 'Vehicle Identification Number', 'Registration Date', and 'Issue Date'. 3. Supplementary Page: The text on the front of the supplementary page is also in black. It includes 'License Plate Number', 'Approved Passenger Capacity', 'File Number', 'Curb Weight', 'Gross Weight', 'Approved Load Capacity', 'Overall Dimensions', 'Permitted Towing Gross Weight', 'Remarks', and 'Inspection Record'.
8
1
Share

Can a 4S shop perform PDI without the customer present?

4S shops should conduct PDI inspections in the presence of the customer. Below is a detailed introduction to the PDI inspection items: 1. Body inspection: Mainly checks whether the body panels have paint peeling or dents, and whether components like lights and wipers are functioning properly. 2. Interior inspection: Examines the interior trim, seats, and dashboard for any damage or aging issues, while also checking all interior functions, such as the air conditioning, audio system, and power-adjustable seats. 3. Engine compartment inspection: Starts the engine to check if it operates smoothly and normally, ensures the engine compartment components and wiring harness are clean and tidy, and checks for any impact damage. 4. Chassis inspection: Lifts the vehicle to inspect the chassis for scratches and checks for oil leaks in components like the engine and transmission.
14
0
Share

What is the history of BMW cars?

BMW was founded in 1916 and is headquartered in Munich, Germany. Here are the details about BMW: 1. Historical Background: BMW (Bayerische Motoren Werke), fully known in Chinese as Bavarian Motor Works Co., Ltd., is a German luxury car brand. BMW's vehicle series include the i, X, Z, and pure numeric models such as 1, 2, 3, 4, 5, 6, 7, and 8, as well as the M series (BMW's official high-performance modification division) based on improvements to these series. BMW was founded in 1916 and is headquartered in Munich, Bavaria, Germany. The blue and white logo of BMW represents the colors of the Bavarian state flag. Over the past century, BMW has evolved from an aircraft engine manufacturer into a corporate group that dominates the premium car market and produces globally renowned aircraft engines, off-road vehicles, and motorcycles, ranking among the top automobile companies in the world. Its full name is die Bayerischen Motorenwerke (Bavarian Motor Works). 2. Logo Introduction: B.M.W. stands for Bayerische Motoren Werke (Bavarian Motor Works), and the colors and design of the logo are derived from the coat of arms of Bavaria, where BMW is located.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.