How to Replace the Battery in a Tiggo 8 Key?

1 Answers
MaximusLee
07/29/25 5:56pm
Steps to replace the Tiggo 8 key battery are as follows: 1. Push the slider on the key to release and remove the mechanical key. 2. Use a flat-head screwdriver with tape wrapped around the tip to separate the smart key cover, then remove the circuit board. 3. Take out the battery holder from the circuit board to remove and replace the battery. Notes when replacing the battery: 1. When installing the battery, be careful not to bend the electrodes and terminals. 2. Ensure the battery is installed with the correct polarity. 3. Make sure your hands are dry and away from water sources when replacing the battery. Below is some related information about the Tiggo 8: The Tiggo 8 has a body length of 4700mm, width of 1860mm, height of 1746mm, and a wheelbase of 2710mm. The Chery Tiggo 8 is positioned as a mid-size SUV and is set to be the flagship SUV in the future.
Was this review help?
17
3
Share
More Forum Discussions

When did the National VI emission standard take effect in Chengdu?

Chengdu implemented the National VI emission standard on July 1, 2019. The State Council announced that key regions, the Pearl River Delta region, and the Chengdu-Chongqing region would implement the National VI standard on July 1, 2019, while other regions would implement it from July 1, 2020. More details are as follows: 1. Article 4, Section 15 of the "Three-Year Action Plan for Winning the Blue Sky Defense Battle" issued by the State Council clearly stipulates that the National VI emission standard would be implemented in advance in key regions, the Pearl River Delta region, and the Chengdu-Chongqing region starting from July 1, 2019. The promotion and use of gas vehicles meeting the National VI emission standard were encouraged. 2. Fifteen provinces and municipalities across the country successively issued documents to implement the National VI emission standard in advance in 2019, meaning that only vehicles meeting the National VI standard could be registered starting from July 1, 2019. 3. After the implementation of the National VI emission standard, all vehicles sold and registered must meet the requirements of the National VI standard. Vehicles below this emission standard will be prohibited from being sold, registered, or transferred. National IV and National V emission vehicles can only be scrapped or relocated to regions where the National VI standard has not yet been implemented.
4
4
Share

What is the minimum ground clearance of the Beijing Hyundai Fista?

The minimum ground clearance of the Beijing Hyundai Fista is 150 millimeters. The minimum ground clearance of the Beijing Hyundai Fista refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. If the Beijing Hyundai Fista has a higher ground clearance, its off-road capability improves. However, if the ground clearance is too high, the stability at high speeds may decrease. The Beijing Hyundai Fista is a compact car under the Beijing Hyundai brand, featuring a 4-door, 5-seat sedan body structure. The dimensions of the Beijing Hyundai Fista are 4660 millimeters in length, 1790 millimeters in width, and 1425 millimeters in height, with a wheelbase of 2700 millimeters. Generally, the ground clearance of sedans ranges between 110 millimeters and 150 millimeters, while SUVs have a ground clearance between 200 millimeters and 250 millimeters. However, the ground clearance of the Beijing Hyundai Fista is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the Beijing Hyundai Fista. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-maintained roads, vehicles with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, vehicles with higher ground clearance are preferable to avoid damage to the chassis.
6
4
Share

Can a Financed Car Be Repainted?

For a car purchased through a loan, consent from the lending bank is required. Once approved, the vehicle's motor vehicle registration certificate, commonly known as the 'big green book,' must be retrieved from the bank. Then, you can apply for a color change at the vehicle management office. Without the green book, color change registration cannot be processed. According to Article 6 of Chapter 2 of the 'Road Traffic Safety Law,' if the color change area of a motor vehicle does not exceed 30%, no registration for the change is required. Conversely, if it exceeds 30%, the change must be filed and registered within 10 days after the repainting. Notes on Vehicle Color Change: Before repainting a motor vehicle, consult the vehicle management office where the vehicle is registered to check if the region permits changing the vehicle color using wraps. If the region does not support this method, the change cannot be registered, and the wrap must be completely removed to restore the original color. Documents required for applying to change the color of a motor vehicle: 'Motor Vehicle Change Registration Application Form.' Original and photocopy of the identity proof of the vehicle owner and agent. Original motor vehicle registration certificate. Original motor vehicle license. Clearance of all fines. Additionally, according to Article 10 of the 'Motor Vehicle Registration Regulations,' owners are no longer required to apply in advance to the vehicle management office. They can first change the vehicle color, install body kits, replace the engine, etc., and then apply for change registration. According to Article 10, registered motor vehicles must apply for change registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Whole vehicle replacement due to quality issues. Change from commercial to non-commercial use or vice versa. Change in the vehicle owner's residence in or out of the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the 'Road Traffic Safety Law of the People's Republic of China': Police cars, fire trucks, ambulances, and engineering rescue vehicles must display emblem patterns as regulated and install alarms and signal lights. Other motor vehicles are prohibited from displaying, installing, or using emblem patterns, alarms, or signal lights specific to or similar to those of the aforementioned vehicles.
4
0
Share

How to Calculate Fuel Consumption per 100 Kilometers in Liters?

Fuel consumption per 100 kilometers = Fuel consumption (liters) ÷ Distance traveled (kilometers) × 100. When the fuel gauge light comes on, fill up the fuel tank, reset the trip odometer to zero, and record the trip odometer reading when the fuel gauge light comes on again after driving.
20
5
Share

What to Do in Case of a Traffic Accident While Driving?

In the event of a traffic accident, if you are able to move, immediately exit the vehicle and move away from the accident scene to prevent secondary damage. Rescuing the injured is the top priority. Call 120 immediately to request medical assistance. Always protect the accident scene and call 110 right away to have the police determine liability.
13
1
Share

How to Apply Window Tint Film?

First, clean the car window thoroughly, then cut the window tint film to the appropriate size, and spray a suitable amount of water on the window. Lay the tint film flat in place, then use a squeegee to remove bubbles and excess water. Finally, inspect and wipe clean. However, it can be somewhat challenging for beginners, so it's recommended to visit a professional auto beauty shop for a more hassle-free experience.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.