How to Replace the Battery in a Tiggo 5 Key?

2 Answers
ConnorDella
07/24/25 4:54am
Method for replacing the battery in a Tiggo 5 key: There are two screws on the back cover of the car key. Use a screwdriver to remove each screw separately. Once the back cover is opened, you can see the battery panel. Remove the old battery, install the new one, then reattach the back cover and tighten the screws. The Tiggo 5 is a sporty SUV. In terms of body dimensions, it measures 4506mm in length, 1841mm in width, and 1740mm in height, with a wheelbase of 2610mm. For power, the Tiggo 5 is equipped with a 1.5T engine, model SQRE4T15, with a maximum power output of 112kw. It is paired with either a 7-speed manual or a 7-speed dual-clutch transmission. In terms of appearance, this car adopts Chery's family-style design, featuring a rectangular air intake grille paired with polygonal headlights and stylish chrome decorations, giving this SUV a rugged design style.
Was this review help?
2
5
Share
DelAubrey
08/11/25 12:30am
I've replaced the battery for my Tiggo 5 key several times myself, and it's quite simple. The key uses a CR2032 coin cell battery, which can be easily purchased at supermarkets or online. First, locate the small gap in the middle of the key and gently pry open the casing using a flathead screwdriver or a coin, being careful not to apply too much force to avoid breaking the internal clips. Once opened, you'll see a small battery compartment containing the old battery; the battery has a positive mark facing upward, so make sure to note the correct orientation to avoid installing it backward. Next, remove the old battery and replace it with a new CR2032, then press the casing firmly together and test if the unlock button lights up normally. The whole process takes just a few minutes. I recommend keeping a spare battery handy in case of emergencies, as the battery typically lasts one to two years before the signal weakens and needs replacement. I also applied a bit of lubricant to the clips to make it easier to open next time, preventing it from getting stuck again. Doing it yourself saves time and money compared to visiting a repair shop, and it's quite fun. Regularly checking the key's battery level can help avoid unexpected situations.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

What brand is the Mitsubishi ASX engine?

Mitsubishi ASX is equipped with the Mitsubishi 4A92 engine produced by Shenyang Dongan Mitsubishi Engine Factory. The new ASX is powered by a 2.0L naturally aspirated engine paired with a CVT transmission, which features a steel belt-type transmission mechanism. Below is relevant information about the Mitsubishi ASX: GAC Mitsubishi ASX uses 1.6L and 2.0L engines. The 2.0L model is equipped with a 4B11 MIVEC naturally aspirated engine, matched with the third-generation INVECS CVT continuously variable transmission.
7
3
Share

How to Replace the Key Battery for a Haval Car?

Haval car key battery replacement tutorial is as follows: 1. Prepare a screwdriver and locate the opening notch on the side of the key. 2. Use the screwdriver to pry open the key along the seam from the notch to reveal the inner core of the key and locate the battery. 3. Use the screwdriver to remove the old battery, replace it with a new one, and reassemble the key in the reverse order. Below are the relevant details for the Haval H2: The Haval H2 is a compact SUV launched by the Haval brand under Great Wall Motors. The Haval H2 has a body length, width, and height of 4335mm, 1814mm, and 1695mm respectively, with a wheelbase of 2560mm.
6
5
Share

Can Electric Vehicles Be Charged on Rainy Days?

It is not recommended to charge during heavy rain. The waterproofing of electric vehicle charging components meets strict standards, ensuring insulation, and charging is possible during light rain. However, charging is not advisable during heavy rainfall. Measures for charging during rainy weather: Use an umbrella when unplugging the charging gun: If it rains while charging, use an umbrella to cover the charging gun when unplugging it to prevent it from getting wet. After removing the charging gun from the charging station, check if the gun head is intact and whether there is water or other foreign objects inside to ensure charging safety. Ensure proper connection of the gun head: After confirming the charging gun is in good condition, open the protective cover of the vehicle's charging port and insert the charging gun. If the connection is successful, the chance of water leakage is minimal. Check if the charging station is functioning properly: After successfully connecting the charging gun, monitor the display on the charging station to see if charging has begun. If charging does not start, take immediate action and adjust the charging gun as needed. Cover the charging port promptly after charging: Once charging is complete, first power off, then remove the charging gun from the vehicle's charging port. While unplugging the charging gun, securely close both covers of the vehicle's charging port to prevent water ingress and potential safety hazards.
14
3
Share

Are Parallel Import Cars Legal?

Parallel import cars are also legal products. Parallel import vehicles are cars imported directly from their country of origin, generally referring to vehicles imported directly from the car's original production country, which also enter the domestic market after passing 3C certification. Below is some information about parallel import cars: 1. Parallel import cars can simply be understood as vehicles purchased by traders from overseas markets and directly introduced into the Chinese automotive market for sale. 2. Due to different import locations, parallel import cars are further categorized into US-spec cars, Middle East versions, Canadian versions, and European versions. 3. The objects of parallel imports are products carrying intellectual property, more precisely, intellectual property products, rather than the intellectual property itself.
6
1
Share

Where is the cabin air filter of Volvo XC90 located?

Volvo XC90's cabin air filter is located inside the glove compartment in front of the front passenger seat. All Volvo cabin air filters are positioned in the same location. The function of the cabin air filter is to absorb various harmful substances in the air, minimizing the risk of passengers being irritated due to allergies. Below are the steps to remove the cabin air filter: 1. Remove the glove compartment on the front passenger side. 2. Remove the panel on the left side of the front passenger seat. 3. The fuse box is right in front of the filter cover, so remove the fuse box first. 4. After removing the fuse box, you can see the cover of the cabin air filter. Open the cover to access the cabin air filter.
9
1
Share

How to Start a Car?

Car starting procedure: 1. Turn the ignition key clockwise to the START position; 2. Apply slight forward pressure to rotate it. Release immediately when the engine starts, as the ignition switch will automatically return from the start position to the normal ignition position; 3. After the engine starts, observe the instrument panel indicators and check for any abnormal engine noises, water leaks, or oil leaks; 4. Before starting the engine, ensure the parking brake lever is fully engaged and confirm the gear shift lever is in neutral or P position; 5. Do not operate the starter for more than 5 seconds at a time. Allow at least 15 seconds between attempts, with no more than 3 consecutive attempts. If the engine fails to start after 3 attempts, identify and resolve the issue before trying again.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.