How to Replace the Battery in a Roewe Remote Key?
2 Answers
Use a small flathead screwdriver to gently pry open the screw end, then remove the remote key battery and its sealing cover. Use tweezers to take out the old battery from the remote key, install the new battery ensuring correct polarity. Reinsert the battery sealing cover into the remote key, making sure it is correctly positioned and fully seated. Finally, use the small flathead screwdriver to turn the screw in the key storage slot to the 'off' position.
I've been using my Roewe car for several years and I'm quite familiar with replacing the remote key battery. First, locate the small gap in the middle of the key - usually you can gently pry open the casing using a coin or small screwdriver. Inside you'll find a small button battery, model CR2032, which is easily available at supermarkets or online. Remember not to rush pulling it out; check the positive and negative sides first. When inserting the new battery after removing the old one, make sure the positive side faces upward and press it gently into place. When closing the casing, align the clips properly until you hear a click indicating it's secured. Finally, test the key buttons to verify functionality - if it works normally, you've succeeded. I recommend replacing it every two years because as the battery ages, the remote range shortens and sometimes unlocking becomes difficult. Keep a spare battery in your car - replacing it yourself when the battery dies saves both money and hassle.
