How to Replace the Battery in a Roewe 350 Car Key?
2 Answers
To replace the battery in a Roewe 350 car key, follow these steps: 1. Prepare the Roewe 350 car key and a replacement battery. 2. Pull out the mechanical key to reveal the covered side, then use a flat screwdriver to insert and pry open the car key cover. 3. Open the car key cover to expose the battery inside. 4. Remove the old battery and insert the new one. 5. Close the car key cover to complete the battery replacement. Here are more details about the Roewe 350: 1. The Roewe 350 is a compact sedan positioned in the A-segment market by SAIC Motor, following the Roewe 750 and Roewe 550. Its body dimensions are 4521mm in length, 1788mm in width, and 1492mm in height, with a wheelbase of 2650mm. 2. The Roewe 350 is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 80kW (109PS) and a peak torque of 135Nm. The transmission system is matched with a 4-speed automatic gearbox.
Changing the battery for the Roewe 350 key is actually quite simple. I tried it myself for the first time. There's a small gap on the back of the key. Use a small flathead screwdriver or a coin to carefully pry open the plastic shell, but don't use too much force to avoid breaking the clips. Inside, you'll find a button battery, usually the CR2032 model. Place the new battery with the correct side facing down to avoid reversing it. When closing the cover, press it firmly to ensure a good seal against moisture. The whole process takes just a few minutes, and there are video tutorials online for reference. Remember to test the lock button after replacement to ensure it works properly. The battery typically lasts one to two years, so regular checks can prevent sudden failures. Avoid using overly sharp tools—safety first.
