How to Replace the Battery in a Nissan Tiida Remote?
5 Answers
To replace the battery in a Nissan Tiida remote, follow these steps: 1. Slide the small switch on the back of the key. 2. Pull out the mechanical key by gripping the top part and pulling it outward. 3. After removing the mechanical key, you will see a small groove. Use a flathead screwdriver or another tool to pry open the key cover along the groove. Once a gap is created, manually open it. 4. After opening the key cover, remove the old battery and replace it with a new one. Taking the 2020 Tiida as an example, it is a compact SUV with the following dimensions: length 4393mm, width 1766mm, height 1539mm, wheelbase 2860mm, minimum ground clearance 173mm, and fuel tank capacity 52l.
I just replaced the battery for my Tiida's remote key, and it was quite simple. First, when the remote key stops responding, it's mostly due to a drained battery, typically a CR2032 model. Find a flat surface to work on, use a coin or a small thin tool to gently pry open the key from the side gap—don't apply too much force to avoid cracking the plastic shell. Inside, you'll see a small round battery; remove it with your fingernail or tweezers. Purchase a new CR2032 battery of the same type, place it with the positive side facing up, and ensure it's firmly pressed in. Then, reattach the cover until you hear a click, indicating it's locked. Finally, test the unlock and lock buttons to see if they work—if the light turns on, you've succeeded. It's advisable not to wait until the battery completely dies before replacing it; check the battery level every six months and opt for reputable brands to prevent leakage. Doing it yourself saves time and money—just keep a pack of spare batteries at home.
Hey, I also replaced my Tiida's remote battery myself - super easy! Step one is locating the small seam on the key fob, then gently prying open the case using a credit card or fingernail. After removing the old CR2032 battery, just buy a new one and pop it in. The key is remembering the battery orientation - install it with the round side facing up. Snap the case shut with a gentle press and test the buttons. The whole process takes under 10 minutes, and batteries cost just a few bucks online. Pro tip: avoid leaving your key in hot spots like cars or pockets for too long, as heat drains battery life. After a few tries you'll get the hang of it - just stay calm and watch those fingers!
When my Tiida's remote acts up, I just replace the battery—it's simple. First, use a small flat tool to gently pry open the case from the edge, being careful not to force it. Remove the old CR2032 battery and clean the contacts to prevent dust buildup. Insert the new battery with the positive side facing up, then securely close the case. After replacement, test the locking function to ensure everything works. Safety first—avoid accidentally pressing the key buttons. The battery lasts 1-2 years, so keep a spare CR2032 at home for emergencies. Opt for eco-friendly batteries and recycle them properly after use.
As a handy tip for car maintenance, replacing the Nissan Tiida remote battery is a three-step process: locate the seam on the key, gently pry it open with a blade or screwdriver; when removing the old CR2032 battery and installing the new one, avoid touching the internal circuits; place the new battery with the positive side facing outward, then close and test the buttons. The tools required are simple, and it's good practice to regularly check for rust-free contacts. If you can't open it, don't force it—refer to the manual instead. Batteries are inexpensive, and doing it yourself saves on repair costs. The key steps shouldn't take more than 10 minutes, and steady hands prevent mishaps.
