How to Replace the Battery in a Mercedes-Benz B180 Key?

1 Answers
Tim
07/30/25 7:42am
Mercedes-Benz B180 key battery replacement method is: 1. Remove the mechanical key from the smart key, the smart key is the L-shaped key; 2. Carefully observe the top of the smart key, use this L-shaped key to pierce through the shallow groove of the smart key and push it all the way down, you will notice that the back cover of the smart key will automatically pop out; 3. Remove the old battery, then install the new battery, and reassemble the back cover and mechanical key. The Mercedes-Benz B180 is a compact car with a maximum engine power of 100 kW and a maximum torque of 200 Nm. The front suspension of the car uses a MacPherson independent suspension, the rear suspension uses a torsion beam non-independent suspension, and the drive mode is front-wheel drive.
Was this review help?
5
0
Share
More Forum Discussions

What is the difference between a 6-cylinder engine and a 4-cylinder engine?

The difference between a 6-cylinder engine and a 4-cylinder engine lies in the number of cylinders. Here are the specific differences between a 6-cylinder and a 4-cylinder engine: 1. A 6-cylinder engine has 6 cylinders; a 4-cylinder engine has 4 cylinders. 2. A 6-cylinder engine has two more sets of pistons than a 4-cylinder engine, with four additional compression rings and two additional oil rings, increasing the contact and friction area by approximately 30%. 3. An L4 engine is more compact, lighter, and has a lower failure rate compared to a V6 engine. Here is some relevant information about 4-cylinder engines: 1. A 4-cylinder engine, also known as a 4-cylinder power unit, is a machine that converts one form of energy into another more useful form of energy. 2. The engine body consists of the cylinder block, crankcase, cylinder head, and cylinder gasket components. 3. The engine is the device that provides power to the car, determining its power, fuel efficiency, stability, and environmental friendliness. 4. The engine is the device that provides power to the car, converting the thermal energy of gasoline and diesel into mechanical energy by burning and expanding gases in a sealed cylinder to push the pistons and perform work.
3
3
Share

Should I turn on the left turn signal when overtaking?

When overtaking, you should turn on the left turn signal. Overtaking should be done from the left side of the vehicle in front. After overtaking and maintaining a necessary safe distance from the overtaken vehicle, turn on the right turn signal and return to the original lane. According to Article 47 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China, when overtaking, motor vehicles should turn on the left turn signal in advance, switch between high and low beams, or sound the horn. Here are the relevant details about overtaking: 1. On roads without a center line or with only one motor vehicle lane in the same direction, when the vehicle in front receives an overtaking signal from the vehicle behind, it should reduce speed and give way to the right if conditions permit. 2. The vehicle behind should overtake from the left side of the vehicle in front after confirming there is sufficient safe distance. After maintaining a necessary safe distance from the overtaken vehicle, turn on the right turn signal and return to the original lane.
9
2
Share

Why is the fan still running after the car is turned off?

It is normal for the fan to continue running after the car is turned off. When the engine coolant temperature is higher than the acceptable soak temperature for the engine at the moment of parking, the vehicle's computer will automatically calculate the fan's operating speed and duration, thereby controlling the fan's operation. Below is an introduction to why the fan may still be running after the car is turned off: 1. The higher the engine temperature, the longer the fan will run after parking. When the engine coolant temperature drops below the soak temperature, the fan will turn off, protecting the engine and extending its service life. 2. The car radiator consists of three parts: the inlet chamber, the outlet chamber, and the radiator core. The coolant flows inside the radiator core, while air passes outside the radiator. The hot coolant cools down as it dissipates heat to the air, and the cold air warms up by absorbing the heat from the coolant.
8
1
Share

What to Do If You Buy a Stock Car?

If you purchase a stock car, you can request the 4S store to replace the car, refund the payment, and compensate for any losses. If you choose not to replace the car, you can ask for a partial refund and negotiate for discounts on future maintenance and repairs. These maintenance and repair discounts should be included in the purchase contract to prevent any future disagreements. Tips to maximize benefits when buying a stock car: 1. Price: A stock car cannot be compared to a new car, and the price should be discounted accordingly, typically around 30% lower than a new car. 2. Maintenance: Since a stock car has been stored for some time, you can request the 4S store to inspect components such as the engine oil, battery, rubber seals, and tires. If any wear or aging is found, demand replacements.
9
3
Share

Is Push-to-Start Easy to Steal?

Push-to-start cars are not easy to steal. Here are some details about push-to-start cars: 1. Anti-theft: The car has an anti-theft function. The push-to-start feature is a reflection of the car's intelligence, simplifying the starting process. It can be modified at the car key or installed independently on the car. The push-to-start feature is also one of the selling points for car manufacturers and requires coordination with the PKE intelligent system to demonstrate its intelligence. 2. Push-to-start: Push-to-start cars retain the insertion port for a mechanical key. The push-to-start feature includes a start button program that is fully controlled by a chip, comprehensively simulating the original car key start mode. It has high working stability and all the functions of a car key.
11
4
Share

What Are the Reasons Why the Car Door Cannot Be Opened Normally?

There are four main reasons why a car door cannot be opened normally. Below is a detailed introduction to these four reasons and their solutions: 1. Child lock is activated: When the child lock is activated, the car door cannot be opened normally. Simply use the appropriate key to turn the child lock to the off position. 2. Door lock cable failure: When the cable fails, the lock block cannot be opened. At this time, the door lock cable should be replaced to restore the door's functionality. 3. Deformation of door hinges or lock pillar: After the door is subjected to external force, the hinges and lock pillar may deform, preventing the door from opening normally. In this case, new hinges and lock pillar should be installed to restore the door to normal operation. 4. Door limiter failure: A malfunctioning limiter is one of the reasons why a car door cannot be opened. When the limiter fails, opening the door requires more effort. Simply replace the door limter with a new one.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.