How to Replace the Battery in a Mazda Remote?
1 Answers
Mazda remote can lock and unlock the car. When replacing the battery in a Mazda remote, follow these steps: 1. Turn the car remote key to the back, and you will see the back cover divided into two parts. Look at the side with the key ring, the battery is under the back cover here. 2. Turn the key to one side to see if there is a gap. There is a gap between the key ring and the key side, and the back cover cannot be removed by hand. 3. Use a flathead screwdriver, insert it into the gap, and apply slight upward force to lift part of the back cover. Since force is applied to one part, the entire back cover cannot be removed. 4. Move the screwdriver along the gap to both sides to gradually widen the gap. 5. Move the back cover by hand in the closing direction to remove the back cover and see the inside of the battery. A protruding clip can be seen on one side of the battery. When pressing the clip part of the battery, the battery will expand. 6. Place the battery into the car remote key in the opposite direction of disassembly. Pay attention to distinguish the positive and negative poles, and do not install the battery backward.