How to Replace the Battery in a Lavida?
3 Answers
The steps to replace the battery in a Lavida are: 1. Turn off the ignition switch and all electrical appliances; 2. Remove the negative cable to prevent it from coming into contact with the positive terminal; 3. Remove the positive cable; 4. Unscrew the bolts on the battery fixing bracket and remove the battery for replacement. The Lavida's body dimensions are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm and a fuel tank capacity of 51 liters. The Lavida is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
Replacing the Lavida Battery - Here's How to Do It: First, park the car securely, turn off the engine, and engage the handbrake to ensure safety—this is crucial because working with electricity is hazardous. The battery is located in the engine compartment, towards the front on the right side of the engine; you'll see it once you open the hood. Prepare a new battery that matches the Lavida's original specifications, such as 12V 60Ah—don't get the wrong one to avoid starting issues. Use a cross wrench or socket to loosen the nuts—when disconnecting, remove the negative terminal (black cable connector) first, then the positive terminal (red cable). Do not reverse the order, as this increases the risk of a short circuit. Next, remove the old battery, clean the area, and install the new one, securing it firmly in the base. When reconnecting, reverse the steps: attach the positive terminal first, tighten the nut, then connect the negative terminal, ensuring it's secure. Finally, remember that disconnecting the battery resets the system—after starting the car, you'll need to re-enter the radio code and manually relearn the one-touch window function. The whole process takes about 20 minutes, but safety comes first—wear insulated gloves.
I replaced the battery of my Lavida myself, and the process was quite smooth—turn off the car, open the hood, and locate the square box battery. I easily loosened the cable connector nuts with a regular wrench: first disconnect the black negative cable, then the red positive one to avoid sparks. After removing the old battery, place the new one in position and ensure the base isn’t loose. For reconnection, reverse the order: first secure the red positive terminal, then fasten the black negative one. Key reminder: don’t get the model wrong, for example, the CCA value must be sufficient, otherwise, the car will start slowly in winter. Later, I found the radio was locked due to power loss, so I had to check the codebook to reset it—simple. Tools needed are just a wrench and a flashlight. Avoid touching any metal parts during the process to prevent electric shock. Even beginners can handle it—don’t be afraid.
