How to Replace the Battery in a Hyundai Elantra Remote Key?

2 Answers
LaJaxson
07/29/25 8:27am
Modern Elantra remote key battery replacement steps are as follows: 1. Press the small silver button at the top of the car key; 2. Grasp the top and pull out the mechanical key; 3. Insert the mechanical key into the key slot, rotate it slightly, then insert a thin tool into the slot and gently pry open the remote cover. 4. Remove the old battery, install the new battery, ensuring it is positioned correctly; 5. Reattach the remote key back cover. Smart key precautions are as follows: 1. The smart key should not be near radio stations, airports, or other radio transmitters that may interfere with its normal operation. 2. The smart key should not be near mobile two-way radio communication systems or mobile phones. 3. If the smart key does not work properly, use the mechanical key to open and close the car door.
Was this review help?
20
4
Share
DePiper
08/11/25 5:58pm
When replacing the battery in my Hyundai Elantra remote key, I find a quiet place and prepare a new CR2032 battery and a plastic pry tool. First, check the back or side of the key for a small gap—usually, you can gently pry open the casing with your fingernail or the edge of a bank card. Avoid using knives or metal tools to prevent scratching the interior. Second, when removing the old battery, pay attention to the positive and negative markings. The CR2032 battery should have the plus sign facing up to avoid malfunction due to incorrect installation. Third, insert the new battery, ensuring it snaps securely into place without any looseness. Finally, reattach the casing, press it firmly with your palm, and test the remote lock and unlock functions to ensure they work properly. If the remote still doesn’t work after replacement, the internal circuitry might be dirty or the battery model might be incorrect—clean the contacts or confirm it’s the correct CR2032 model. I always keep spare batteries at home and check them once a year to avoid sudden power failure emergencies. Doing it yourself is simple, takes just a few minutes, and saves unnecessary expenses.
Was this review help?
14
5
Share
Expand All
More Forum Discussions

Where to Apply for Driver's License Renewal?

When applying for a driver's license renewal at the vehicle management office where the original license was issued, you should fill out the 'Motor Vehicle Driver's License Application Form' and submit the following documents. The specific requirements are as follows: 1. Documents: The driver's identity proof; the original driver's license; a health condition certificate issued by a county-level or military regimental-level medical institution. 2. Process: On a working day, bring your ID card, original driver's license, and one copy of each to the local traffic police department for renewal. If you don't have copies, it's okay as most service windows provide photocopying services. If you make copies yourself, remember to photocopy both the ID card and driver's license on the same A4 sheet.
6
5
Share

What is MacPherson Independent Suspension?

MacPherson independent suspension is: a type of suspension system that connects the body, frame, and wheels, primarily consisting of shock absorbers, suspension springs, lower control arms, longitudinal rods, steering knuckle arms, rubber bushings, and linkages. The function of the suspension is: to transmit forces and torques between the wheels and the frame, cushion the impacts from uneven road surfaces to the frame or body, and dampen the resulting vibrations to ensure smooth driving. The main structure of MacPherson independent suspension is: a coil spring mounted over a shock absorber. The shock absorber prevents the coil spring from shifting forward, backward, left, or right when under force, restricting the spring to only vertical vibrations. The stiffness and performance of the suspension can be adjusted by the length and tightness of the shock absorber's travel.
5
3
Share

What colors are available for the Enclave?

The Enclave comes in the following colors: Eclipse Blue, Merlot Red, Iron Gray, Shadow Gray, Snow White, and Black Onyx. Taking the 2020 Enclave as an example, it is a mid-to-large-size SUV with the following dimensions: length 4981mm, width 1953mm, height 1727mm, wheelbase 2863mm, fuel tank capacity 73l, and curb weight 1880kg. The 2020 Enclave features a MacPherson strut front suspension and a five-link independent rear suspension. It is powered by a 2.0L turbocharged engine with a maximum horsepower of 237ps, maximum power of 174kw, and maximum torque of 350nm, paired with a 9-speed automatic transmission.
12
2
Share

What is the adjustment method for the left rearview mirror?

Left rearview mirror adjustment method: Position the horizontal line at the center line of the mirror, then adjust the edge of the vehicle body to occupy one-quarter of the mirror's image. The function of the rearview mirror is: To reflect conditions behind, beside, and below the vehicle, expanding the driver's field of vision and reducing the occurrence of safety accidents. Methods to judge vehicle distance using the rearview mirror: 1. Using the center of the rearview mirror as a reference line, when the vehicle body is on the outer side of the reference line and the rear vehicle cannot be fully seen, the distance is 5m; 2. When the rear vehicle can be completely seen in the rearview mirror with the vehicle body pressing on the reference line, the distance is 10m.
5
2
Share

How many kilometers should the spark plugs of an Audi A4L be replaced?

The spark plugs of an Audi A4L should be replaced approximately every 20,000 kilometers, and you can follow the mileage specified in the maintenance manual for replacement. Taking the 2020 Audi A4L as an example, it is a mid-size car with body dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, a wheelbase of 2908mm, and a curb weight of 1610kg. The 2020 Audi A4L features a five-link independent suspension both front and rear, and is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum torque of 270Nm, and a maximum power of 110kW, paired with a 7-speed dual-clutch transmission.
16
1
Share

What year does the tenth digit of the vehicle identification number correspond to?

Vehicle identification number tenth digit as J means 1988. The tenth digit is the model year code. Each year is assigned a code character. Here is the extended content: 1. From the 1980s to 2000, each year was represented by a character, with 1980 assigned the character A, and 2000 assigned the character Y. Subsequent years are represented by numbers, with 2001 coded as 1, 2002 as 2, and so on. 1988 was assigned the character J. 2. Since each manufacturer uses different codes, and each vehicle produced by the same factory has its own production sequence number, every vehicle produced in a specific year has a unique VIN.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.