How to Replace the Battery in a Haval H2 Remote Key?

1 Answers
Andres
07/29/25 7:54pm
The method for replacing the battery in a Haval H2 remote key is as follows: 1. On the side of the smart key, there is a button with a key symbol. Press it and use your other hand to remove the mechanical key. 2. There is an "OPEN" marking and a reserved prying position on the cross-section of the smart key. Use a tool to gently pry at that position. Be careful to control the force, as applying too much pressure may scratch the casing and affect its appearance. 3. After prying it open, gently separate the key to reveal the battery compartment. 4. Use a tool to gently lift the battery from the edge, causing it to pop out automatically. Remove the old battery and install the new one. When inserting the new battery, ensure one side is embedded first, forming an angle to fit into the slot. Gently press the battery until you hear a "click," indicating it is properly installed. 5. After replacing the battery, reattach the cover, aligning the upper and lower parts, particularly the two pin-like connectors. Below is an introduction to the Haval H2: 1. The Haval H2 is the first domestic model to adopt a mix-and-match design, featuring a two-tone body color scheme that allows consumers to customize according to their preferences. 2. The interior of the Haval H2 features a completely new design, making it more stylish compared to other Haval models.
Was this review help?
16
2
Share
More Forum Discussions

What are the effects of overfilling engine oil and how to solve it?

Overfilling engine oil can cause the following effects: 1. Reduced vehicle power; 2. Increased fuel consumption; 3. Severe damage to the three-way catalytic converter; 4. Accelerated aging of vehicle components. The solution for overfilled engine oil is: Pull out the engine oil dipstick, which has MIN and MAX markings indicating the lower and upper limits of oil level. Add oil if the level is below the MIN mark, but do not add if it's above the MAX mark - instead, remove the excess oil. Engine oil is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers.
18
3
Share

Is the car's primer white or black?

The car's primer can be either white or black, depending on the specific model and color choice. For example, black cars typically use white primer, while white cars often use gray primer. This is mainly to make it easier to identify the primer when the paint is scratched. Currently, primers can generally be categorized into dip primers, water-based dip primers, anodic electrophoretic primers, and cathodic electrophoretic primers. Most passenger cars use cathodic electrophoretic primers. The car primer is the first layer of paint applied to the body. Generally, only after the primer is sprayed can the next painting process proceed. As a primer, its primary function is to protect the car body. The primer comes into direct contact with the body, which is mainly made of metal. Therefore, the primer must have excellent anti-corrosion and anti-rust properties, as well as good adhesion, both to the car body and the topcoat.
18
2
Share

Which city does the license plate 'Jiang' belong to?

There is no license plate 'Jiang'. The license plate codes for cities in Jiangxi Province are: Gan A for Nanchang, Gan B for Ganzhou, Gan C for Yichun, Gan D for Ji'an, Gan E for Shangrao, Gan F for Fuzhou, Gan G for Jiujiang, Gan H for Jingdezhen, Gan J for Pingxiang, Gan K for Xinyu, and Gan L for Yingtan. License plates can be either official or temporary. Temporary license plates are made of paper and do not need to be fixed to the front or rear of the vehicle. If they are not affixed as required, it is equivalent to driving without a license plate. License plates are plates hung on the front and rear of a vehicle, usually made of aluminum, iron, plastic, or paper, with the vehicle's registration number, registration region, or other relevant information engraved on them.
5
4
Share

What are the requirements for upgrading from B2 to A1 license?

The requirements for upgrading from B2 to A1 license are: 1. For applicants seeking to upgrade to a large bus (A1) license, the original permitted driving models must be B1 or B2, with a driving experience of at least five years and no record of accumulating 12 penalty points within the past three years; 2. For applicants whose original permitted driving model is A2, the driving experience must be at least two years, with no record of accumulating 12 penalty points within the past year, and the age must be between 26 and 50 years old; 3. Applicants who have caused a fatal traffic accident and bear full responsibility are not eligible to apply for upgrading their permitted driving models. A driver's license, also known as a 'driving license,' is a document issued by the government transportation department to individuals who qualify to drive, usually in the form of a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test.
7
1
Share

How to adjust the front and rear position of the front passenger seat?

The methods to adjust the front and rear position of the front passenger seat are: 1. There is a horizontal handle under the seat. Pull it downward or upward, and the seat can then be moved forward or backward. Once adjusted to the desired position, release the handle to lock the seat in place; 2. If it is electrically controlled, locate the adjustment button and press or push the button to make adjustments. Car seats can be categorized by shape into split seats and bench seats; by function into fixed, removable, and adjustable seats; by passenger capacity into single, double, and multi-person seats; and by material into leather seats and fabric seats. Based on seat performance, they have evolved from the earliest fixed seats to multifunctional power-adjustable seats, including air-cushion seats, electric seats, stereo sound seats, mental recovery seats, and even electronically adjustable seats.
3
5
Share

How many liters of engine oil should be added to the Mercedes-Benz e300 2.0T?

Mercedes-Benz e300 2.0T requires 8 liters of engine oil. Engine oil is a substance enhanced with additives in base oil, mainly containing anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. Engine oil is used for lubricating internal combustion engines, with its main functions being to reduce friction and wear of moving parts, and to remove sludge (one of the functions of dispersants) and paint from the engine. Taking the Mercedes-Benz E-Class 2021 E300L Fashion model as an example: its length, width, and height are 5078mm, 1860mm, and 1484mm respectively, with a wheelbase of 3079mm. It is equipped with a 9-speed automatic manual transmission, and the maximum speed reaches 250 kilometers per hour.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.