How to Replace the Battery in a Haval Car Key?

3 Answers
LeAlana
07/24/25 8:53pm
Haval car key battery replacement method: Pry open the key casing along the seam, then remove the old battery and install a new one. If your car's remote key runs out of power, it is recommended to replace it immediately to avoid any inconvenience in normal vehicle use. Haval is an independent brand that specializes in manufacturing SUV models, and its SUVs have gained popularity among countless consumers. The best-selling model from Haval is the H6, a compact SUV. The new Haval H6 is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine.
Was this review help?
5
0
Share
NicoleAnn
08/10/25 9:31am
As a veteran driver who has been driving a Haval for many years, I'm quite handy when it comes to replacing the key battery. The battery model is usually a CR2032 coin cell. First, use a thin plastic sheet or a coin to pry open the back cover of the key—be gentle to avoid scratches. Once open, the old battery can be easily removed. Pay attention to the positive side facing up; align the new battery the same way when inserting it. Then, simply close the cover and press it gently to secure it. To test, press the unlock button to see if the red light flashes—if it does, you're good to go. I recommend checking the battery once a year to avoid the hassle of it dying while you're out. You can buy the battery in the electronics section of a supermarket for just a few bucks. Daily maintenance is crucial; this simple task can save you a lot on repair costs.
Was this review help?
16
2
Share
Expand All
DelMolly
09/26/25 5:02am
I just replaced the battery in my Haval car key, and it was quite simple. Gently pry open the shell from the key gap, remove the old battery, confirm the model is CR2032, insert the new battery with the positive side facing up, and close the cover while pressing until you hear a click. Test the buttons—if the light comes on, it's good to go. Over time, the battery naturally depletes, affecting remote unlocking, so I always keep a spare battery in the car. For small tasks like this in daily life, it's good to be handy and gentle—don't force it, as dropping the key can make it more prone to damage. In short, don't stress—doing it yourself is much cheaper than going to the dealership.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

Are There Differences Between D, E, and F Motorcycle Licenses?

Currently, motorcycle licenses are categorized into three types: D, E, and F. The main differences between them lie in the types of vehicles and engine displacements they permit. The D license allows the holder to operate any motorcycle-defined vehicle, as its scope includes both E and F licenses. Here are the distinctions between D, E, and F licenses: 1. Broader Driving Scope: Since it serves as proof of driving skills and enables operation of all motorcycle-defined vehicle types, obtaining a D license offers a wider range of applications. 2. Minimal Cost Difference: The expenses required to obtain a D or E license are not significantly different, and the time investment is the same. Following the principle of 'more skills are never a burden,' it is advisable to opt for the D license. 3. Similar Examination Content: The differences in the test content for D and E licenses are minimal, and the overall process is relatively easy. Therefore, obtaining a D license under these circumstances is more appropriate.
18
2
Share

How to Handle a One-Time Deduction of 12 Points on a C License?

C1 driver's license holders who accumulate or receive a one-time deduction of 12 points must attend a 7-day theoretical course (Subject 1) at the local traffic management department of the public security authority within 15 days. After passing the exam, the points will be cleared, and the driver's license will be returned. Below are the detailed steps: 1. Attend the Course: If a motor vehicle driver accumulates 12 points in a scoring cycle, the traffic management department of the public security authority will confiscate their driver's license. The driver must report within 15 days to the traffic management department where the license was issued or where the violation occurred to attend a 7-day course on road traffic safety laws, regulations, and related knowledge. After completing the course, the vehicle management office must administer an exam on road traffic safety laws, regulations, and related knowledge within 20 days. 2. Exam: If the exam is passed, the points will be cleared, and the driver's license will be returned. If the exam is failed, the driver must continue attending the course and retake the exam. Refusal to attend the course or take the exam will result in the traffic management department publicly announcing the suspension of the driver's license.
12
2
Share

What is the ground clearance of the Volkswagen Sharan?

The ground clearance of the Sharan is 152 millimeters. Ground clearance refers to the distance between the ground and the rigid objects at the bottom of the vehicle. Here is some information about the Sharan: 1. Vehicle dimensions: The Sharan is a 5-door, 7-seater MPV with body dimensions of 4854 mm in length, 1904 mm in width, 1740 mm in height, and a wheelbase of 2920 mm. 2. Powertrain: The Sharan is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW at 5000 to 6000 rpm and a maximum torque of 250 Nm at 1500 to 3500 rpm, paired with a 6-speed dual-clutch transmission.
2
1
Share

What are the items included in the second maintenance service?

Car second maintenance, also known as the second service, is performed at 10,000 kilometers. The basic items include changing the engine oil and oil filter, while some models may require replacing the air and cabin air filters. The second maintenance also involves inspection and maintenance of dozens of items across multiple systems, including the engine, transmission, air conditioning system, steering system, braking system, suspension, body, and tires. The inspection and maintenance items can be divided into the following four parts: 1. Replace engine oil, oil filter, and air filter. Check the tension and speed of the engine belt and the condition of various fluids. 2. Check tire pressure and look for bulges, damage, or uneven wear. 3. Inspect the chassis, brake pads, brake discs, ball joints, CV joints, and connecting rods for any scratches or damage. 4. Finally, check the lights and all switches in the vehicle.
6
2
Share

What is the traction force of a car?

The traction force of a car is the torque generated by the car's internal combustion engine, which is transmitted to the drive wheels through the transmission mechanism, causing the drive wheels to produce a circumferential force on the road surface. Here is some introduction about traction force: 1. When there is sufficient adhesion between the drive wheels and the road surface, meaning the drive wheels do not slip on the road, a reaction force equal in magnitude but opposite in direction to this circumferential force is generated by the road surface on the drive wheels, propelling the car forward on the road. 2. In mechanical engineering, traction force refers to the rotational torque exerted by the transmission system of wheeled vehicles, including cars, railway locomotives, bicycles, etc., on the wheels, generated through the interaction between the drive wheels and the ground or rails.
9
0
Share

How to Disable the Child Lock on the Teana?

Disabling Method: It is the reverse of locking, simply turn the key in the opposite direction to loosen it. For sedans, the upper interface is directly behind the headrest, while for hatchbacks, the interface is on the backside of the seat, requiring the trunk lid to be opened for installation. The purchase of a child seat comes with installation instructions, and the entire operation is relatively simple—just follow the manual's instructions. More relevant information is as follows: 1. Principle of the Child Lock: The principle of the child lock is quite simple. The mechanical lock's switch consists of the interior and exterior door handles, which operate on a two-lever principle to open the mechanical lock. The child lock's function is to secure the interior handle's control lever, preventing the door from being opened from the inside. This is primarily to prevent children seated in the rear from opening the door and slipping out while the vehicle is in motion, hence the child lock is installed. 2. Note: Generally, child locks are located on both rear doors. When the child lock function is activated, it is either on the rear door lock mechanism or a small device outside the lock mechanism, making it impossible to open the rear doors from the inside, though they can still be opened from the outside. When the child lock function is deactivated, the doors can be opened both from the inside and outside. This function is particularly essential when the vehicle is traveling at high speeds. If a child were to accidentally open the door, the consequences could be dire. Most modern vehicles are equipped with this feature.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.