How to Replace the Battery in a Geely Binyue Car Key?
4 Answers
Steps to replace the battery in a Geely Binyue car key: 1. Press the small switch at the top of the car key; 2. After pressing the switch, grab the top of the key to pull out the metal mechanical key; 3. Once the mechanical key is removed, the hidden part will be visible; 4. Prepare a screwdriver, press along the groove to pry it open, and after a gap appears, pull it apart at both ends; 5. Once opened, the car key will split into two parts, allowing you to replace the battery. As the first SUV model based on the BMA architecture, the Binyue is powered by a 1.5T three-cylinder engine jointly developed by Geely and Volvo. This engine delivers a maximum power of 177 horsepower and a peak torque of 255 Nm, paired with a 7-speed wet dual-clutch transmission.
Changing the battery in a Geely Binyue car key is quite simple. I usually enjoy fixing things myself, so I’d like to share my experience. First, prepare a small cross-head screwdriver or a flat tool like a bank card. The Geely Binyue key typically has a snap-fit design. Locate the small release hole on the side of the key, press it with the tool or your finger, and then pull out the mechanical key part. Next, gently pry open the key cover with the screwdriver to avoid cracking the plastic. Inside, you’ll find the old battery, which is a CR2032 coin cell—make sure not to buy the wrong type. When removing the old battery, note that the positive side faces up, and insert the new battery in the same orientation. Reassemble the key cover and test the remote buttons to see if they light up—that’s it! The whole process takes about five minutes, saving you money and hassle. Remember to keep the battery away from water or metal to prevent short circuits. If you can’t pry open the key cover, checking a YouTube video for guidance is a safer option.
Changing the Battery for a Geely Binyue Car Key I'll give it a try; this job doesn't require many tools for daily use. I'll find a coin or a small flathead screwdriver at home because the key cover is usually secured with clips. First, locate the small release hole on the key, press it to pull out the mechanical key, then gently pry open the cover with the coin. Once opened, you'll see the CR2032 button battery. Don't throw away the old battery—remember to buy a new one of the same model and install it with the positive side facing up. After installation, close the cover and test the buttons to confirm everything works. The whole process is simple and saves you 50 yuan in repair fees. Just be sure to clean the key slot to avoid dust interference. The battery can be bought at the supermarket—don't cheap out on knockoffs.
As a new car owner, I just replaced the battery in my Geely Binyue car key, and it wasn't that scary. First, I bought a CR2032 coin cell battery, then pressed the release button on the side of the key with my finger or a small card to remove the mechanical key part. Next, I carefully pried open the top cover of the key, being careful not to use too much force. After seeing the old battery, I took it out and replaced it with the new one, making sure the positive side matched the markings. Then, I put the cover back on and tested the remote function. Remember to wear gloves to prevent electric shock. The whole process took less than three minutes, and the key casing wasn't damaged.
