How to Replace the Battery in a Civic Key?

1 Answers
OCourtney
07/30/25 7:03am
The method to replace the battery in a Civic key is as follows: 1. There is a small switch on the front of the key. Manually flip it, then grab the silver part at the top and pull out the mechanical key; 2. After removing the key, there is a groove at the top. Use the removed metal key to pry it open; 3. At this point, the key is divided into three parts. Remove the old battery, insert the new battery, and then reattach the cover. The Civic features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 177 PS, a maximum power of 130 kW, and a maximum torque of 220 Nm, paired with a CVT continuously variable transmission.
Was this review help?
11
2
Share
More Forum Discussions

How long does the first maintenance at a 4S store take for a new car?

The first maintenance for a new car at a 4S store can take as little as forty minutes or as long as two to three hours, depending on the requirements. The duration of maintenance depends on: The length of the maintenance is determined by the number of service items and whether the workshop has available workstations. Therefore, when scheduling vehicle maintenance, it is essential to make an appointment in advance via phone. Car maintenance items include: Gasoline filter replacement: The gasoline filter's role is to filter impurities and moisture from the gasoline, providing clean fuel to the engine, allowing it to perform optimally. Air filter replacement: The air filter is used to filter dust from the air. When large particles mix between the piston and cylinder, a phenomenon known as 'cylinder scoring' can occur, hence the need for a device that filters particles and dust from the air. Failing to replace the air filter for an extended period can lead to insufficient engine air intake, resulting in decreased combustion performance.
19
1
Share

How to distinguish between Quattroporte and Ghibli?

The differences between Quattroporte and Ghibli: 1. Different body dimensions: Quattroporte has a length, width, and height of 5262mm, 1945mm, and 1455mm respectively; Ghibli has a length, width, and height of 4971mm, 1945mm, and 1455mm respectively. 2. Different wheelbase: Quattroporte has a wheelbase of 3171mm; Ghibli has a wheelbase of 2998mm. 3. Different engines: Quattroporte is equipped with V6 and V8 engines; Ghibli is equipped with a V6 engine. Maserati is an Italian luxury car manufacturer headquartered in Modena. The coupe series embodies Italy's top coupe manufacturing technology and is a perfect combination of Italian design aesthetics and high-quality craftsmanship. Quattroporte and Ghibli are models under the Maserati brand.
13
2
Share

Can a New Car That Hasn't Completed the Break-in Period Be Driven on the Highway?

Can a new car that hasn't completed the break-in period be driven on the highway. Reasons for the judgment: A new car can be driven on the highway during the break-in period as long as other operations are followed, and there is no need to worry about any harm to the new car from highway driving. Most new cars have undergone "cold running-in" before leaving the factory, which involves mounting the engine on a special machine tool and using an electric motor to run it in. During this process, most burrs on the parts can be worn away. Precautions for highway driving during the break-in period: The engine speed must be strictly adhered to during the break-in period. Generally speaking, when the speed increases to 120 kilometers per hour, the engine speed should not exceed 3,000 rpm. Experienced drivers will notice that even without reaching 3,000 rpm, the vehicle speed can already reach the maximum speed limit on Chinese highways.
10
4
Share

What does the car anti-falling device mean?

Car anti-falling device is fixed on the three-dimensional parking equipment to prevent the accidental falling of the car-carrying plate in a static state. Lifting three-dimensional garage: For the lifting three-dimensional garage, the anti-falling device can prevent the damage of the transmission device (chain, wire rope or motor and its transmission device) in the static state of the car, which may cause falling or tilting and lead to accidents of human and car injuries. Importance of anti-falling device: The new version of "General Safety Requirements for Mechanical Parking Equipment" clearly stipulates that "when the handling device (or car-carrying plate) is in place, if an accident occurs, which may cause the handling device or car-carrying plate to fall from a height, an anti-falling device should be set". In view of the importance of the anti-falling device, there are more than ten types of it.
19
1
Share

What are the methods to remove stubborn smoke odor from a car?

Methods to remove stubborn smoke odor from a car include: 1. Place fruits with strong adsorption capabilities such as grapefruit peel, pineapple, and lemon in the car; 2. Place white vinegar, which has sterilizing and cleaning abilities, in the car; 3. Use activated charcoal to eliminate odors; 4. Remove protective films inside the car; 5. Open windows for ventilation; 6. Spray an appropriate amount of air freshener. Reasons that may cause odors in the car: 1. Overheated wires or short circuits in electrical devices; 2. Unclean air conditioning filters or air ducts; 3. Malfunctioning tires or rubber belts, emitting a burnt rubber smell; 4. Damaged fuel tank or leaks in the fuel supply system; 5. Leakage or shortage of electrolyte; 6. Burnt clutch plates; 7. Extensive use of plastic, rubber, and other materials in the car's interior, which gradually release organic solvents and additives into the car.
1
2
Share

Do I need to bring my ID card for practicing Subject 2?

You need to bring your ID card for practicing Subject 2. Subject 2 procedure: Fasten the seat belt, adjust the seat and rearview mirrors, check if the gear lever is in neutral; ignite the engine, press the clutch with your left foot, shift to first gear, and press the brake with your right foot simultaneously; turn on the left turn signal, honk the horn, release the handbrake, slowly lift the clutch with your left foot until you feel the vehicle vibrate, then hold it there while gradually releasing the brake with your right foot; the vehicle starts moving forward, at this point the right foot brake is completely released, while the left foot remains in the semi-engaged position, indicating a successful start. Subject 2 precautions: Bring your ID card. You must bring your ID card to take the exam. Without an ID card, you cannot take the exam. After all the preparation, don't let the lack of an ID card prevent you from taking the exam. Additionally, make sure to turn off your phone during the exam, as any activity from the phone may be considered cheating.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.