How to Replace the Battery in a Chery Tiggo 5 Key?
2 Answers
The method for replacing the battery in a Tiggo 5 car key is as follows: There are two screws on the back cover of the key. Use a screwdriver to remove each screw, then open the back cover to reveal the battery panel. Remove the old battery, install the new one, reattach the back cover, and tighten the screws. Below are some details about the Chery Tiggo 5: The Tiggo 5 has body dimensions of 4506mm in length, 1841mm in width, and 1740mm in height, with a wheelbase of 2610mm. In terms of exterior design, the Tiggo 5 features the Chery family-style design, with a rectangular grille paired with polygonal headlights and stylish chrome accents, giving this SUV a rugged design style. Combined with the dynamic bumper design, the entire front end exudes a masculine vibe.
Last time I drove a Chery Tiggo 5, I replaced the key battery myself—it was quite simple. Just find a small flathead screwdriver or coin, gently pry open the seam on the back of the key (there's a snap-fit design, so don't use too much force to avoid cracking it). After opening, remove the old battery, which is usually a small round CR2032 battery available for a few bucks at supermarkets or auto parts stores. Insert a new battery of the same model, making sure the positive side (the side with writing) faces up when placing it in. Close the cover and press it firmly, then test whether the unlocking button's range has returned to normal. I recommend buying branded batteries like Panasonic for better durability—don’t cheap out and risk damaging the key’s internals. The battery typically lasts 1 to 2 years; replace it when the signal weakens to avoid getting locked out unexpectedly. Before starting, watching a tutorial video can give you extra peace of mind.
