How to Replace the Battery in a Changan CS75 Car Key?

1 Answers
SanSara
07/29/25 4:47pm
Changan CS75 car key battery replacement method: Use a small flat-head screwdriver or a plastic pry tool to gently pry open the remote control shell, being careful not to damage the internal circuits during the process; For detachable mechanical keys, the mechanical key needs to be removed first. You can use the mechanical key to pry at the gap. Once pried open along the gap, the entire cover can be opened; After opening the remote key cover, you will see the battery, which is a CR2032 model. Remove and replace it as needed; When installing the battery, pay attention to the positive and negative polarity directions. After completion, close the key cover and press the button to test if the function is normal. The Changan CS75 is a compact SUV with body dimensions of 4650mm in length, 1850mm in width, and 1715mm in height, with a wheelbase of 2700mm. In terms of power, the vehicle is equipped with a Blue Whale 1.5TGDI direct-injection turbocharged engine.
Was this review help?
12
1
Share
More Forum Discussions

How many cylinders does the Volvo XC60 have?

Volvo XC60 is a four-cylinder vehicle. Below are the relevant details: 1. The Volvo XC60 is equipped with two types of engines. One is a low-power version 2.0-liter turbocharged engine, and the other is a high-power version 2.0-liter turbocharged engine. The low-power version 2.0-liter turbocharged engine delivers 190 horsepower and a maximum torque of 300 Nm, with maximum torque available from 1,400 rpm and sustained up to 4,000 rpm. The high-power version 2.0-liter turbocharged engine provides 254 horsepower and a maximum torque of 350 Nm, with maximum torque available from 1,500 rpm and sustained up to 4,800 rpm. 2. The body dimensions of the Volvo XC60 are 4,688 mm in length, 1,902 mm in width, and 1,658 mm in height, with a wheelbase of 2,865 mm.
2
5
Share

How Many Turns Can a Car Steering Wheel Make?

A car's steering wheel can typically turn two to two and a half full rotations. Below is a detailed introduction about steering wheels: 1. Steering wheels can be classified into single-spoke, double-spoke, triple-spoke, and four-spoke designs (a steering wheel is circular, and the sections where the circumference connects to the steering column determine its classification. If the circumference is divided into two parts, it's a double-spoke, commonly used in racing cars; three parts make it a triple-spoke, often found in sports cars and coupes; four parts create a four-spoke, typically used in standard and luxury sedans). The primary function of a steering wheel is to control the vehicle's direction, enabling straight-line driving and steering the wheels to change the car's orientation. 2. The correct hand position for steering is to place the left hand at the 9 o'clock position and the right hand at the 3 o'clock position. When gripping the wheel, both thumbs should rest on the outer edge to ensure flexibility in maneuvering and to prevent finger injuries in emergency situations. When turning the wheel, hands should alternate smoothly.
19
0
Share

What does a car facelift model mean?

Car facelift refers to minor modifications made on the basis of the original model, such as changes to the headlights, tire rims, interior, and some may also involve engine recalibration, as well as updates to the exterior, interior, and configurations. Car facelifts are generally divided into three stages: 1. Initial stage: To address issues after the new car launch. 2. Mid-term: Mid-term facelifts usually involve new tuning of the car's engine performance, such as increasing horsepower, enlarging the rims, or even adding some equipment. 3. Late stage: When a car model is in its final 1 to 2 years before a generation change, there will be a major facelift, typically featuring the highest trim level of the model, with significant changes to the exterior, such as the headlights, taillights, reshaping of the front and rear fenders, and substantial optimization of the interior.
16
2
Share

What does it mean when the handbrake light flashes yellow with a slash?

The handbrake light flashing yellow with a slash indicates a malfunction in the vehicle's handbrake system. In such cases, it is advisable to drive cautiously and visit a repair shop or 4S store for maintenance as soon as possible. If the handbrake indicator light is on, it could also be due to insufficient brake fluid. Below are the differences between an electronic handbrake and a manual handbrake: 1. Different control methods: the electronic handbrake controls the parking brake via an electronic button, while the ordinary handbrake controls the parking brake through a mechanical handbrake lever. 2. Different maintenance costs: the electronic handbrake is controlled by an electronic system, resulting in higher maintenance costs; the ordinary handbrake has a simpler structure and lower maintenance costs. 3. Different operations: the electronic handbrake only requires pressing a button to control the parking brake, while the ordinary handbrake requires pulling the parking brake handle to control the parking brake.
8
4
Share

What is the size of car tire bolts?

Different car models use different tire bolts, but the common specifications are 17mm, 19mm, 21mm, and 22mm. The wheels are fixed with bolts, and different cars have different numbers of bolts and different bolt specifications for fixing the wheels. More information about tire bolts is as follows: 1. When tightening the wheel fixing bolts, they should be tightened in the specified order and with the specified torque. 2. Some high-end cars have aluminum wheel fixing bolts, which cannot be tightened with an impact wrench. Aluminum wheel bolts will break directly if tightened with an impact wrench. 3. The wheel fixing bolts only need to be removed and installed when replacing a spare tire or all four tires.
10
3
Share

How to Fix a Fuel Tank Cap That Won't Close?

A fuel tank cap that won't close may be due to deformation of the cap or damage to the locking mechanism. Here are the repair methods: 1. Check if the fuel tank switch is stuck, causing the cap to remain open. 2. Inspect the locking mechanism of the fuel tank cap for issues, which are often caused by deformation. The reasons why a fuel tank cap won't close are as follows: 1. There may be a problem with the switch's connecting wire, which could be stuck between components, preventing the cap from closing. When closing the cap, check the connecting wire and adjust it downward if necessary. 2. It might be due to a broken motor or latch in the fuel tank cap, in which case a visit to a repair shop is required for inspection and repair.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.