How to Replace the Battery in a Buick GL8 Remote?

2 Answers
DiAlexis
07/29/25 4:57pm
Buick GL8 remote battery replacement method: 1. Remove the mechanical key; 2. Open the key cover, you can use a screwdriver or other tools; 3. After opening the key cover, you will see the battery, remove the old battery and replace it with a new one; 4. When installing the new battery, ensure the positive side is facing upwards, then close the key cover. The all-new Buick GL8 Avenir family has body dimensions of 5219mm, 1878mm, 1799mm, and a wheelbase of 3088mm. The Buick GL8 is equipped with the Buick Advanced Intelligent Driving Assistance System, offering multiple high-level intelligent driving assistance functions including LCC Lane Centering Intelligent Cruise, TJA Traffic Jam Assist, HOD Hands-Off Detection, DOW Door Open Warning, and more. Buick's advanced intelligent driving assistance technology not only meets the ASIL D higher functional safety level requirements but also supports OTA remote upgrades, with the capability to expand to higher-level driving assistance functions.
Was this review help?
8
4
Share
VonLydia
08/14/25 6:55am
I drove a Buick GL8 for many years and know the frustration of a remote control running out of battery. Replacing the battery is actually quite simple. First, prepare a small screwdriver or coin and use it to gently pry open the shell at the gap of the key—be careful not to use too much force to avoid scratching the plastic. Once opened, you’ll see a small button battery, model CR2032, which can be bought for a few dollars at a supermarket or auto parts store. Carefully remove the old battery with a tool, making sure not to lose the spring clip. Then, insert the new battery with the positive side (marked side) facing up, close the shell, and press firmly to secure it. After replacement, test the door unlocking and locking functions immediately. If there’s no response, it might be due to poor contact—double-check the installation. Pay attention to signs of weakening key signals, such as shorter range or slower response, as these indicate it’s time to replace the battery. Don’t wait until it’s completely dead and causes trouble. Keep a spare battery in the car for emergencies—a simple DIY fix saves you a hundred bucks at the dealership.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

Where is the Peugeot 301's Cabin Air Filter Located?

The cabin air filter of the Peugeot 301 is located in the inner layer of the glove compartment on the left side. The replacement method is as follows: Press inward at the center position of the glove compartment to access the cabin air filter, then remove the old filter and install a new one. The Peugeot 301 has the following dimensions: length 4442mm, width 1748mm, height 1476mm, wheelbase 2652mm, minimum ground clearance 120mm, and curb weight 1155kg. It is equipped with a 1.6L inline 4-cylinder turbocharged engine producing maximum power of 117PS, peak torque of 150Nm, and maximum output of 86kW at 6000rpm. The maximum torque is achieved at 4000rpm, paired with a 6-speed manual transmission.
12
3
Share

What is the purpose of tire rotation?

The purpose of tire rotation is to achieve even tire wear, extend tire service life, prevent abnormal tire wear, and improve driving safety. The methods for tire rotation are: 1. For bias-ply tires, swap the tires on the same axle to ensure even wear on both sides; 2. For radial tires, rotate them within the same side of the vehicle. Tire maintenance methods include: 1. Maintain correct tire pressure; 2. Regularly inspect tires for bulges, cracks, cuts, punctures, and abnormal wear; 3. Check the tire surface for stones, nails, or other hard objects and clean them promptly; 4. Perform four-wheel rotation.
19
4
Share

What are the maintenance methods for car wipers during use?

Car wiper maintenance methods during use are: 1. When using wipers to remove dust from the windshield on sunny days, be sure to spray windshield washer fluid and avoid dry wiping; 2. If there are other stubborn, hard contaminants on the glass, clean them manually and do not force the wipers to remove them directly; 3. When lifting the wiper blades during car washing or routine cleaning, hold the backbone of the wiper blade straight and gently return it when putting it back, avoiding snapping the wiper blade back suddenly; 4. In winter, first use an ice scraper to remove ice chips from the windshield surface to avoid increasing the burden on the wipers; 5. If contaminants on the wipers are difficult to clean or the wipers themselves have problems, repair them promptly.
3
2
Share

What are the reasons for a car starting and then stalling on its own?

The reasons for a car starting and then stalling on its own are: 1. Insufficient fuel, aging or clogged fuel pump, malfunctioning fuel pressure regulator, or fuel leakage with air or water contamination; 2. Worn oil pump, oil pressure below the starting threshold, issues with the oil pressure sensor or safety valve; 3. Faulty high-tension wires, spark plugs, or ignition coils; 4. Engine malfunction; 5. Weak battery, loose battery terminals, faulty ignition switch, aging or poor contact in the ignition circuit; 6. Abnormalities in other signal sources, preventing correct and timely transmission of signals to the control computer.
17
0
Share

What is the first maintenance mileage for the Jetta VS5?

The first maintenance for the Jetta VS5 is at 5,000 kilometers. The first maintenance items include: 1. Changing the engine oil and oil filter, and cleaning the air filter; 2. Checking whether the levels of various fluids are normal; 3. Inspecting the generator belt and wiper blades for any damage; 4. Checking whether the tire pressure is normal; 5. Inspecting the chassis and all switches of the vehicle. The Jetta VS5 is equipped with a 1.4T inline 4-cylinder turbocharged engine, with a maximum horsepower of 150 PS, a maximum torque of 250 Nm, a maximum power of 110 kW, a maximum power speed of 5,000 to 6,000 rpm, and a maximum torque speed of 1,750 to 3,000 rpm. It is paired with a 5-speed manual transmission.
3
1
Share

Will High Tire Pressure Trigger an Alarm?

High tire pressure will trigger an alarm. The hazards of excessive tire pressure include: 1. Reduced friction and adhesion of the tire, affecting braking performance; 2. Increased steering wheel vibration and deviation, lowering driving comfort; 3. Accelerated wear on the central tread pattern of the tire, reducing tire lifespan; 4. Increased vehicle vibration, indirectly affecting the lifespan of other components. Factors affecting tire pressure: 1. Seasonal factors—in winter, it is advisable to increase tire pressure by 0.2bar based on the standard tire pressure, while in summer, if the car is parked outdoors, the pressure can be 0.1bar lower than the standard to prevent blowouts due to high temperatures; 2. Tire pressure measurement environment—cold tires and hot tires have different pressures, with a typical difference of 0.3bar to note during measurement.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.