How to Replace the Battery in a Beijing Hyundai Car Key?

1 Answers
LeThomas
07/30/25 4:02am
Here are the steps to replace the battery in a Beijing Hyundai car key: 1. First, press the small silver button at the top of the car key. 2. Grab the top and pull out the mechanical key. 3. Insert the mechanical key into the slot and twist to pry open the car key cover. 4. After opening the car key, remove the circuit board to see the battery. 5. Remove the old battery and insert the new one. 6. Finally, reattach the circuit board and close the car key cover. Additional information: Here are the body specifications for Beijing Hyundai: 1. Length: 4680mm. 2. Width: 1800mm. 3. Height: 1450mm. 4. Wheelbase: 2700mm. 5. Tire specifications: 205/55R16 or 225/45R217.
Was this review help?
20
2
Share
More Forum Discussions

What is the normal tire pressure?

According to the provisions and requirements of the international GBT2978-2008 standard, the tire pressures for different tires are as follows: Standard tires: 2.4-2.5bar; Reinforced tires: 2.8-2.9bar; Maximum pressure: Should not exceed 3.5bar. Normal tire pressure range in winter: In winter, the tire pressure should be based on the standard tire pressure of the car tires, with an appropriate increase of about 0.2bar. Normal tire pressure range in summer: Generally, the lower limit of the standard tire pressure for car tires is sufficient. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures. Hazards of excessive tire pressure: The friction and adhesion of the tires will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; It accelerates the local wear of the tread pattern in the central part of the tire, reducing the tire's lifespan; The vibration of the car body increases, indirectly affecting the lifespan of other components; It causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body and increasing the load on the car during driving; Puncture resistance decreases. When encountering sharp objects such as nails or glass on the road, they can easily penetrate the tire, and the impact can cause internal cracks and explosions, leading to tire blowouts.
7
0
Share

What are the precautions for driving in heavy fog?

Precautions for driving in heavy fog: 1. Use lights correctly: When driving in fog, it's best to turn on all the lights on the car (except for high beams). If driving on the highway or in very thick fog, also turn on the hazard lights. Avoid using high beams in foggy conditions because high beams shine upwards, and the light scattered by the fog can create a blinding white haze in front of the car, impairing visibility. 2. Use the horn for alerts: While constantly honking the horn during normal driving is not only disturbing but also impolite, using the horn in foggy conditions can alert pedestrians on the road that a car is approaching, prompting them to take caution. 3. Avoid slamming on the brakes: Refrain from slamming on the brakes because fog makes it difficult to judge distances. Sudden braking can make it hard for the vehicle behind to gauge the distance, potentially leading to a rear-end collision. The best way to avoid emergency braking is to drive slowly and maintain a longer distance from the vehicle ahead. If emergency braking is necessary ahead, gently press the brakes several times in succession to control speed, effectively alerting the vehicle behind to pay attention.
15
5
Share

What to Do If the ETC Device Falls Off?

ETC needs to be reinstalled and reactivated after falling off. The installation process for the ETC device is as follows: Upon receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device. Method to activate the ETC device: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If the screen shows "Tag Invalid" when inserting and removing the card twice without the tag attached, this is normal and does not affect activation. Alternatively, press the button on top of the electronic tag to enable Bluetooth directly. Turn on your phone’s Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag), then navigate to the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the vehicle’s front to complete activation.
8
5
Share

What is the difference between cast and forged wheels?

Here are the differences between the two: Price: Compared to cast wheels, forged wheels have broken grains and forged structures, while cast wheels have dendritic grains and cast structures. In terms of individual mechanical performance indicators, forged wheels generally improve by 30% to 50%, with some indicators being several times higher. Therefore, wheels of the same model that are forged are usually much more expensive than those made by low-pressure casting. Appearance: Whether cast or forged, after various processes, it is generally difficult to distinguish much difference in appearance unless marked. However, forged wheels usually have simpler and more refined spokes. Performance: Low-pressure cast wheels have good filling properties, fewer shrinkage cavities, and higher density because they are filled and solidified under pressure. Forged wheels, on the other hand, have grain flow directions aligned with the stress direction, resulting in higher strength, as well as significantly better toughness and fatigue strength compared to cast wheels.
4
2
Share

Can You Change Engine Oil Without Replacing the Filter?

It is not advisable to change the engine oil without replacing the oil filter. Here are the specific reasons why the filter should be replaced: 1. Reasons for not skipping the filter replacement: The oil filter is designed to remove various impurities from the oil, primarily metal shavings from mechanical wear and tear, as well as sludge and other contaminants. The engine oil pump draws oil from the oil pan, passes it through the filter for purification, and then directs it into the main oil passage in the engine block. From the main oil passage, the oil is distributed in two directions—one to the cylinder head and the other to the engine block—to lubricate components like the camshaft, valves, crankshaft, connecting rods, and pistons. Failing to replace the filter can lead to clogging. 2. Hazards of not replacing the filter: The oil filter contains a check valve that prevents the oil inside the filter from draining out. This can result in the mixing of old and new oil, accelerating oil degradation. Since the oil filter is installed in the oil's mandatory flow path, all oil must pass through it whenever the engine is running. If the filter is not replaced and becomes dirty, the bypass valve in the oil filter will open to ensure continued lubrication of the engine. However, this allows unfiltered oil, containing metal shavings and impurities, to enter the main oil passage and lubricate moving parts, which significantly increases engine wear.
2
2
Share

How to Operate the Sunroof on Volkswagen Lavida?

The common method is to use the button located at the front roof reading light position. Below is a detailed introduction to the sunroof functions of the Volkswagen Lavida: 1. Open the electric sunroof: Press the rear end B of the button to the 1st position. Press the button to the 2nd position to automatically open the electric sunroof. 2. Close the opened electric sunroof: Press the front end A of the button to the 1st position. Press the button to the 2nd position to automatically close the electric sunroof. 3. Stop the automatic opening or closing of the electric sunroof: Press button A or B again. 4. Open the electric sunroof: Press button C horizontally backward to the 1st position; press the button to the 2nd position to open the sunroof to the comfort position. 5. Close the electric sunroof: Press button D horizontally forward to the 1st position; press the button to the 2nd position to close the sunroof from the comfort position. 6. Stop the automatic opening or closing of the electric sunroof: Press button C or D again.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.