How to Replace the Battery in a Baojun Car Remote Key?
2 Answers
Baojun car remote key battery replacement method is as follows: 1. Use a flat-head screwdriver to pry open the key along the opening line on the side from top to bottom. 2. After removing the key shell with the Baojun logo, you can see the battery compartment at the back. 3. Unscrew the two screws on the battery compartment. 4. Remove the old button battery from the compartment and install the new button battery with the positive pole facing down. More information about Baojun: 1. Baojun is a passenger car brand created by SAIC-GM-Wuling, a relatively special joint venture brand. 2. The length, width, and height of Baojun are 4597mm, 1736mm, and 1462mm respectively, with a wheelbase of 2640mm.
I've always changed the battery of my Baojun remote key by myself, and I find it quite easy. First, locate the small gap on the key shell, and gently pry it open with a fingernail or a credit card. Inside, there's a silver coin battery, usually the CR2032 size. When removing the old battery, remember that the raised part is the positive side facing up. Before installing the new battery, wipe the contact points in the slot with a dry cloth to avoid dust buildup affecting the signal. Then, align the new battery correctly, ensuring the positive side matches, and close the shell until you hear a click to lock it in place. Immediately test the unlock button; if the indicator light turns on, it means success. If there's no response, reopen it to check if the installation is reversed or if there's poor contact. The battery can be bought for a few dollars at auto parts stores or online, and it lasts one to two years—replace it when the buttons start malfunctioning. Be careful not to use excessive force to avoid scratching the shell, and prevent the key from being dropped or getting wet. Once you get used to it, it saves time, effort, and money—just prioritize safety and don't force it.
