How to Replace the Battery in a Baojun Car Remote?
2 Answers
Baojun car key battery replacement method is as follows: Step 1: Remove the mechanical key; Step 2: Use a flat-head screwdriver to pry open a small gap from the side seam of the key. Follow the opening to gradually separate the seams. Insert your fingernail into the middle seam of the remote, gently squeeze, and apply slight outward force to open it. Note: Open one side a bit, then proceed to the other side until it is fully opened; Step 3: Use the flat-head screwdriver to remove the old battery and insert the new one, ensuring the positive side faces downward. Reinstall the circuit board, align the key cover, and press firmly until you hear a click. After securing, check that the seams are not too wide, and the process is complete.
I remember last time when I changed the battery in my Baojun remote, it was quite simple. First, pick up your key and check the back cover—there's usually a small groove or screw hole. My Baojun has a round-shaped key, and there was a small indentation on the back cover. I used a small screwdriver to gently pry it open—don’t use too much force to avoid scratching it. Once opened, you’ll see the battery inside, typically a CR2032 type. Make sure the side with the plus sign (positive side) faces upward when inserting the new battery. I tried twice to get it right, otherwise the battery wouldn’t make contact. Finally, close the cover and press the button to test the locking function—just make sure the light turns on. It’s a good idea to keep a spare battery handy; you can find them cheaply at supermarkets or online. Also, avoid leaving your key near water after use—store it in a dry place to extend the battery life.
