How to Replace the Air Filter on an Atenza?
3 Answers
The method for replacing the air filter on an Atenza is as follows: 1. Open the car's engine hood and locate the square plastic box near the left front wheel in the lower left corner of the engine compartment; 2. Open the clips around the plastic box to reveal the air filter; 3. Replace it with a new air filter. The Atenza is a 4-door, 5-seater mid-size sedan with exterior dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, and a wheelbase of 2830mm. It is equipped with a 2.0L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 116 kW and a maximum torque of 202 Nm. The drivetrain is front-wheel drive, with a front suspension using MacPherson struts and a rear suspension featuring a multi-link independent setup.
I've been driving my Mazda Atenza for ten years, and changing the air filter is a piece of cake—doing it myself has saved me a lot of money. First, park the car on level ground and ensure the engine has cooled for a few minutes, then open the hood. The filter box is usually located near the right-side intake pipe, a black plastic box with several clips. Press gently to open the lid—avoid using excessive force to prevent cracking the plastic. When removing the old filter, be careful not to let dust fall into the pipe, and use a soft cloth to wipe the inside of the box to clear accumulated dirt. Install a new filter of the matching model, ensuring the airflow direction arrow is aligned. Press firmly to seal the clips tightly; otherwise, air leaks could damage the engine. Replace it every 15,000 kilometers—it noticeably improves acceleration response and fuel efficiency. I always keep a spare filter in the garage for regular maintenance, which is both hassle-free and eco-friendly. The whole process takes no more than ten minutes, and even beginners can quickly get the hang of it.
As a daily user of the Mazda6 (Atenza), I enjoy performing my own maintenance. Replacing the air filter is quite simple and requires no tools. After opening the car's hood, you can spot the air filter box at the front-left side of the engine—it's usually a rectangular plastic container. Simply unclip the fasteners or loosen the screws to remove the old filter, being careful not to damage any wiring. Clear out any debris inside the box, and when installing the new filter, ensure its edges are properly sealed. I recommend replacing it every 12,000 kilometers to prevent engine performance loss due to dust intake. I always take the opportunity to check the sealing ring for cracks and replace it if necessary. Using a quality filter reduces pollutant emissions and keeps the cabin air fresher, saving money while ensuring safety. The entire process takes just a few minutes, making it perfect for beginners to practice.
