How to Replace the Air Filter of Wuling Sunshine?

2 Answers
AngelinaDella
07/24/25 10:38pm
To replace the air filter, first open the glove box cover. Locate the fixing buckle on the right side of the glove box and pull it outward with force. Remove the fixing buckle of the glove box cover to detach it. Squeeze both sides of the glove box towards the center with both hands, and the glove box can then be taken off. After removing the glove box, you will see the air filter cover. Press the fixing buckles on both sides of the cover with force, and the cover can be removed. Pull the old air filter outward. Install the new air filter and restore it to its original position in the reverse order of disassembly (pay attention to the installation direction of the air filter).
Was this review help?
8
4
Share
RhettMarie
08/10/25 3:06pm
I used to drive a Wuling Zhiguang, and changing the air filter in that car wasn’t difficult. It’s located behind the glove box—you just need to open the glove box and pull it all the way down to see the clips. Gently pinch them to release. Inside, there’s a plastic cover; remove the two screws with a screwdriver, and you’ll see the old filter. Pull it out directly and replace it with a new one—just buy the OEM model CA-xxx. Make sure not to install it backward; the arrow should point toward the front of the car. The whole process takes about ten minutes, saving you a trip to the repair shop while picking up a new skill. Why change it? A clogged filter affects airflow and the air quality inside the car, especially when the AC is on—dust buildup can easily trigger sneezing. I recommend replacing it once a year, and online filters cost only around 20 yuan. When reassembling, don’t overtighten the screws, as the plastic parts can crack easily.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What are the penalties for driving a Class B vehicle with a Class C license?

Penalties for driving a Class B vehicle with a Class C license: Operating a vehicle that requires a Class B license without the proper qualification is considered unlicensed driving and will result in a fine. Driving a vehicle that does not match the licensed vehicle class will result in a deduction of 12 points. Unlicensed driving can be categorized into the following situations: 1. Not carrying a driver's license: If a driver does not carry a valid driver's license corresponding to the vehicle being driven, it is considered unlicensed driving. 2. Illegally obtaining a driver's license: Using a forged, altered, or illegally obtained driver's license, or a license that has been expired for over a year and thus revoked, or is temporarily suspended, revoked, or canceled, is considered unlicensed driving. If the driver's age or health condition does not meet the driving requirements, such as being underage or exceeding the maximum age limit for the vehicle class, it will be treated as illegally obtaining a motor vehicle driver's license.
8
1
Share

Why do the hazard lights still flash when the car is turned off?

As for the issue of the driveshaft leaking oil, it is necessary to go to a repair shop for inspection and treatment. Whether it needs to be replaced depends on the specific situation. The following is a detailed introduction: 1. Driveshaft: The driveshaft is the shaft in the universal transmission device that can transmit power. It is a high-speed, low-support rotating body, so its dynamic balance is crucial. Generally, driveshafts undergo dynamic balance tests before leaving the factory and are adjusted on a balancing machine. For front-engine, rear-wheel-drive vehicles, the driveshaft transmits the rotation from the transmission to the main reducer. It can consist of several sections connected by universal joints. The driveshaft is composed of a shaft tube, a telescopic sleeve, and universal joints. 2. Assembly of various components: The driveshaft connects or assembles various components, and the circular moving or rotating parts are made of lightweight and torsion-resistant alloy steel tubes. For front-engine, rear-wheel-drive vehicles, it transmits the rotation from the transmission to the main reducer and can consist of several sections connected by universal joints. It is a high-speed, low-support rotating body, so its dynamic balance is crucial. Generally, driveshafts undergo dynamic balance tests before leaving the factory and are adjusted on a balancing machine.
20
2
Share

How Long Does It Take to Renew a Driver's License?

Driver's license renewal typically takes one business day. Below is relevant information regarding driver's license renewal: 1. Timeframe: Renewal should be processed within 90 days prior to expiration. It can still be normally processed within one year after expiration. If expired for more than one year but less than three years, passing the subject one exam is required for renewal. If expired for over three years, the license becomes invalid, and driving is prohibited during the overdue period. 2. Regulations: Motor vehicle drivers must apply for renewal at the vehicle management office of the license issuing location or elsewhere within 90 days before the driver's license expires. When applying, an application form must be completed, and the following documents must be submitted: the driver's identity proof; the driver's license; a health condition certificate issued by a county-level or higher medical institution or a military medical institution at the regimental level or above. For those applying for a special small automatic transmission passenger vehicle for the disabled, a health condition certificate issued by a specialized medical institution designated by the provincial health authority must be submitted.
4
1
Share

Why Should New Cars Be Driven on the Highway?

There are two main reasons for taking a new car on a highway run. The first reason is to break in the engine, allowing the new pistons and camshaft inside the engine to experience their first rapid operation. The second reason is to better adapt to high-speed operation, giving the transmission gears a chance to adjust to high-speed rotation, ensuring smoother meshing between the new gears. Here are some precautions for breaking in a new car on the highway: Drive after changing the engine oil: Breaking in on the highway requires not only skill but also proper timing. The quality of the engine oil is a direct factor affecting the engine. Therefore, it is essential not to drive at high speeds before changing the oil. During high-speed driving, the engine operates at high RPMs, leading to maximum mechanical wear. The first batch of oil contains a significant amount of metal debris and other impurities. Using oil with such debris for high-speed driving can greatly increase engine wear and even cause abnormal wear. As a result, the car will not be in optimal condition after the break-in period. Avoid driving at maximum speed: Breaking in on the highway is meant to gently condition various components of the vehicle. It is crucial not to drive at the car's maximum speed, as this will not achieve the goal of breaking in and may instead cause other issues due to excessive wear on the new car. Driving at speeds between 100–120 km/h is sufficient; there is no need to push the car to 150 km/h or 200 km/h.
11
0
Share

What is the tire model for the GAC Honda Lingpai?

The Honda Lingpai has two tire sizes: 215/55R16 and 215/50R17. In 215/55R16, the first number 215 represents the tire width of 215MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 stands for the rim diameter of 16 inches. The letter "R" in the middle denotes a radial tire. In 215/50R17, the first number 215 represents the tire width of 215MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, and 17 stands for the rim diameter of 17 inches. The letter "R" in the middle denotes a radial tire. The tire brands for the Honda Lingpai are Linglong and Maxxis, featuring a petal-style wheel design, with the spare tire being non-full size. If you want to replace the tires yourself, follow these steps: Take out the spare tire and jack, place the jack under the car frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and at a right angle to the ground; Remove the hub cap, loosen the nuts counterclockwise, but do not fully unscrew them—just enough to eliminate resistance. Keeping the tire on the ground when first loosening the nuts ensures the nuts turn, not the tire; Turn the nuts counterclockwise until loose, repeat for all lug nuts, then completely remove them; Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts, install the lug nuts, tighten them by hand until all nuts are hidden, completing the tire replacement. Besides the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
10
1
Share

What is the wading depth test of the new X-Trail in meters?

The maximum wading depth of the new X-Trail is 400mm. The wading depth of the new X-Trail is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the new X-Trail is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water intake. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration. For roads prone to waterlogging, observe warning water level markers, trees, and reference points like the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.