How to Replace the Air Filter in a Tiida?
2 Answers
Tiida air filter replacement method: 1. Remove the external screws; 2. Take off the padding board under the glove compartment; 3. Remove the old filter and install the new one. The Tiida is a compact car with exterior dimensions of 4393mm in length, 1766mm in width, and 1539mm in height. It has a wheelbase of 2700mm, a minimum ground clearance of 167mm, a fuel tank capacity of 50 liters, and a trunk capacity of 435 liters. The Tiida is equipped with a 1.6L L4 naturally aspirated engine, delivering a maximum horsepower of 122 hp, a maximum power output of 90 kW at 6000 rpm, and a maximum torque of 155 Nm at 4000 rpm.
Changing the air filter for the Tiida is actually quite simple. I've done it myself several times. First, park the car on level ground, turn off the engine, and wait for it to cool down for safety. Then, open the hood—the air filter box is located on the front left side, near the intake pipe. Once you find it, you can usually unfasten the plastic clips by hand. If they're tight, a small screwdriver can help. Take out the old filter and check it—if it's black and dirty, it's time to replace it. When buying a new filter, pay attention to the direction and align it with the grooves before inserting it. Finally, secure the clips tightly to ensure a good seal. The whole job doesn't take long—just about 10 minutes—and the key is it saves money! Remember to replace it every 1 to 2 years or after driving 20,000 kilometers to save fuel and protect the engine. Regularly check the filter's condition and replace it early if it's dirty to avoid affecting the car's performance.
