How to Replace the Air Filter in a Sagitar?
3 Answers
The method to replace the air filter in a Sagitar is as follows: 1. Open the car's hood and locate the position of the air filter; 2. Unscrew the bolts and remove the old air filter; 3. Install the new air filter, close the cover, and tighten the bolts. Taking the 2021 Sagitar as an example, its body dimensions are: length 4753mm, width 1800mm, height 1462mm, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. The 2021 Sagitar is equipped with a 1.2T turbocharged engine, with a maximum power of 85kW and a maximum torque of 175Nm, paired with a 5-speed manual transmission.
I've changed the Sagitar's air filter several times myself, and honestly it's much simpler than expected. Just prepare a T20 Torx screwdriver, open the hood and locate the air filter housing - it's that black rectangular box on the left side of the engine. Use the screwdriver to remove about five or six screws around the housing cover, being careful not to drop them into the engine bay. Once opened, you'll see the old filter - simply pull it out while noting its installation orientation. Don't cheap out on no-name brands for the new filter; Mann's C14007 or Mahle's LX3809 are good choices. When installing the new filter, align it with the housing grooves and press gently without forcing. Finally, replace the cover and tighten the screws diagonally to prevent housing deformation. The whole process takes about ten minutes, saving at least 200 yuan in labor costs compared to dealership service. Monthly inspection of the filter condition is highly recommended.
Here's a lazy way to change the Sagitar's air filter: Open the engine hood and locate the black plastic box next to the battery—that's the filter's home. Use a screwdriver to remove the screws on the front of the box, and when lifting the lid, be careful not to damage the connected intake pipe. Take out the old filter and buy a new one of the same model to avoid mistakes. When reinstalling, ensure the filter's edges are pressed into the sealing groove, and the lid is tightly closed before tightening the screws. It's recommended to clean any leaves or dust inside the box while changing the filter to ensure smooth airflow. A roadside shop charges 80 bucks for this, but doing it yourself costs only 30—isn't it nice to save that money for a tank of gas?
