How to Replace the Air Filter for Golf 7?

1 Answers
Duane
07/29/25 10:05pm
Here is the method to replace the air filter for Golf 7: 1. Open the engine hood and locate a black box in the engine compartment. 2. Open this box to see the air filter, then remove the old one and install the new one. 3. When installing the new air filter, pay attention to distinguishing the front and back sides. Here are the methods to identify the front and back of the air filter: 1. The side with the arrow pointing upwards is the front, which needs to face the airflow direction. The direction of the arrow indicates the airflow direction, which is also the installation direction. 2. Judge the front and back by observing the surface of the air filter. The ordinary fuzzy side is the front, facing upwards towards the airflow direction, while the side with supporting line structure is the back, facing away from the airflow direction.
Was this review help?
14
5
Share
More Forum Discussions

Is the Jetta VS7 Black Edition a limited edition?

Jetta VS7 Black Edition is not a limited edition. Configuration: The Jetta VS7 is equipped with front and rear head airbags, active braking, 360-degree panoramic imaging, adaptive cruise control, front seat heating, automatic anti-glare interior rearview mirror, automatic air conditioning, and temperature zone control, offering more comprehensive functionality. Performance: The Jetta VS7 Black Edition is powered by a 1.4T engine with a maximum output of 150 horsepower and a peak torque of 250 Nm. The transmission system is paired with a 6-speed automatic manual transmission.
11
3
Share

How to Use the CT6 Dash Cam?

Long press the power button to turn the dash cam on or off. It will automatically turn on when connected to a charger. After turning on, the dash cam will automatically enter recording mode. Press the OK button to stop recording. Make sure to insert a memory card before use. After turning on the dash cam, press the mode control button to select the photo mode, then press the OK button to take a photo. Press the mode control button to enter preview mode. Use the up and down buttons to select video files, and the OK button to play or pause the video.
19
4
Share

How to Take the Subject 3 Driving Test in a Different Location?

The method for taking the Subject 3 driving test in a different location is that the student only needs to bring their ID card and photos to the vehicle management office in the city where they are applying to fill out the forms. When operating the lights, the student should hold the steering wheel at the three and nine o'clock positions with both hands and use other fingers to switch between high and low beams, etc. When changing lanes, turn on the turn signal and wait for it to be on for 3 seconds before turning the steering wheel; if the driver is on a single-lane road, they cannot change lanes at this time.
20
4
Share

What are the reasons for no response when shifting gears in new energy vehicles?

Insufficient transmission oil, rust on the transmission input shaft, clutch failure, and excessive clutch gear self-locking force can all cause no response when shifting gears in new energy vehicles. Insufficient transmission oil: If the transmission components lack oil, shifting gears will feel stiff. Transmission oil is similar to engine oil, both lubricating gear components. If the transmission is low on oil, it should be replenished promptly. Rust on the transmission input shaft: The clutch driven disc cannot move normally or return properly, preventing the gear from engaging along the normal trajectory, making it difficult to shift gears. Use a rust remover spray for vehicles, let it sit for 5 minutes, and then wipe off the rust with a soft cloth. Clutch failure: This results in insufficient clutch separation travel, leading to incomplete clutch separation and inability to engage gears. In such cases, the separation travel needs to be adjusted at a repair shop. Excessive clutch gear self-locking force: This makes it difficult to shift in and out of gears. In this situation, the clutch cable and gear lock need to be adjusted at a repair shop. Advantages of new energy vehicles: They generally use natural gas, liquefied petroleum gas, hydrogen, or electricity as power sources, reducing exhaust emissions and effectively protecting the environment. Electric vehicles produce no exhaust and are pollution-free. Hydrogen-powered vehicles emit only water, causing no environmental pollution. Because they are essentially zero-emission, they are also exempt from traffic restrictions. New energy vehicles adopt new technologies and structures, making them more efficient.
7
2
Share

What are the seven-seater models from Ford?

Ford offers four seven-seater models: the Edge, Explorer, Everest, and Transit Custom. Except for the Transit Custom, which is a light passenger van, the other three are SUVs. Below are the detailed introductions of these four models: 1. Edge: The Edge is a seven-seater SUV model, with a sporty and stylish appearance. The chrome design of the dual exhaust pipes at the rear, the red ST metal emblem on the grille and rear, and the unique Ford Performance emblem on the welcome pedals all highlight its distinctive personality. The blackened 21-inch alloy wheels and larger brake discs emphasize its strong sporty traits and performance. 2. Explorer: The body dimensions are 5064mm x 2005mm x 1798mm, with a wheelbase of 2860mm. It also features newly designed alloy wheels, with the sport version still using a blackened treatment. The 3.5T models adopt a dual quad-exhaust layout, exuding a strong sporty vibe. 3. Everest: The Ford Everest is a typical rugged SUV. With just a button press, the second and third-row seats can be electrically folded, significantly enhancing cargo capacity. However, the third-row seating is somewhat limited, as it is a body-on-frame SUV, making the space a bit cramped. Nevertheless, it is quite suitable for children. 4. Transit Custom: The Transit Custom is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 121 PS and a peak torque of 300 N•m. The maximum torque output is achieved at just 1500 rpm, and the fuel consumption is 7.6L per 100 km.
17
1
Share

What is the Haval H6 remote control function?

Haval H6 remote control function allows for intelligent vehicle start-up and air conditioning control. Convenient to use: The remote control range is usually no less than 50 meters. If the vehicle is parked in a ground parking lot, you can remotely start the engine from home or office in advance. Automatic timing: Typically, if no operation is performed after a period of time, the remotely started engine will automatically shut down to avoid fuel waste caused by forgetting to turn it off. Whole vehicle heating: This function, along with parking heating, warms up the coolant in the radiator, effectively heating the cabin, engine, and windows.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.