···
Log in / Register

How to Replace the Air Filter Element for the Vezel?

4 Answers
LeJuniper
07/29/25 9:30pm
Method for replacing the air filter element of the Vezel: There are 3 clips on the air filter housing. After opening the clips, you can see the air filter element. Pull out the filter element to check the degree of dirt and damage, and clean or replace it as needed. When installing, pay attention to the direction of the air filter element by comparing it with the original one. After completion, check whether the filter box is secure and the sealing condition. The Vezel is the first SUV under GAC Honda, with a body length, width, and height of 4294mm, 1772mm, and 1605mm respectively, and a wheelbase of 2610mm. In terms of appearance, the Vezel features a flying wing front face design, with mysterious and elegant black as the main tone, integrating the grille and the lamp body to highlight a pioneering and compact personality. The LED headlights with dual-lamp design are combined with arc-shaped LED daytime running lights, perfectly unifying elegance and sharpness.
Was this review help?
1
2
Share
VanBeau
08/15/25 8:26pm
Hey, I'm the DIY type when it comes to cars, and changing the Vezel's air filter is especially fun and hassle-free. Pop open the engine hood—the air filter box is usually a black plastic case near the front of the engine. The lid opens easily, secured by a few clips or screws that need just the right touch to loosen (no brute force to avoid damage). Then, pull out the old filter, being careful not to let dust or debris fall into the intake pipe—engine performance could suffer if it sucks that in. Before sliding in the new filter, check its orientation; the arrow should point in the direction of airflow, and it should lie flat. Snap the box shut, and the whole process takes 20 minutes tops. I check mine monthly, and a replacement costs just a few bucks—saving loads on maintenance. Hands-on care keeps the ride smoother, too.
Was this review help?
17
0
Share
Expand All
StSamantha
10/17/25 4:09am
As someone with years of car repair experience, I must say the Vezel's air filter replacement is straightforward. First, ensure the engine has cooled down before starting to avoid burns. Open the hood and locate the air filter box at the right front side of the intake pipe, checking for any cracks or damaged clips on the cover. Use a screwdriver or a tool-free method to open the cover, depending on the model year—avoid forcing it open to prevent damaging the seal. Remove the old filter and inspect it carefully for oil stains or dust residue, which indicates inadequate air filtration. Replace it with a high-quality new filter, ensuring the size matches and the installation direction is correct; the arrow should always point in the direction of the airflow to avoid restricting engine breathing. Close the cover firmly to seal it, then start the car and listen for smooth engine operation. Replacing it every 10,000–20,000 km improves fuel efficiency, and doing it yourself saves hundreds in service fees.
Was this review help?
17
2
Share
Expand All
Cody
11/30/25 4:53am
I've been driving the Vezel for several years, and changing the air filter is incredibly simple and hassle-free. Just pop the hood, and you'll quickly spot the filter box in a conspicuous location near the engine. Loosen the clips slightly, lift the cover, and take out the old filter—if it's an OEM part, you can easily find affordable replacement filters online. Before inserting the new filter, remember to align it correctly: the airflow indicator arrow should point toward the engine. Once done, close the box and secure the clips—the whole process takes just 10 minutes. During regular maintenance, I check the filter's condition monthly and replace it promptly if it's dirty. This keeps the car running quieter and more fuel-efficient. DIY maintenance saves money and eliminates the need for professional help—totally worth it.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

How to turn on the external circulation of the Volkswagen Lamando?

On the car's central console, there is a button for external circulation. After pressing the external circulation button, the external circulation will be activated. The methods and scenarios for turning on external circulation are as follows: 1. If the car frequently drives in areas with good environmental conditions or often travels on highways, external circulation can be used for extended periods while the air conditioning is on. 2. Turning the air conditioning adjustment knob clockwise once activates external circulation, while turning it counterclockwise to the bottom activates internal circulation. 3. If the internal circulation is manually adjusted, it is necessary to switch to external circulation after passing through areas with poor air quality. Even if the outside air remains poor, it is advisable to periodically switch the circulation mode.
20
5
Share

What is the meaning of joint venture cars?

Joint venture cars are projects jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital; while foreign investors contribute brands, technology, capital, talent, etc. Joint venture cars are the products of such collaborations. Foreign parties provide technology, talent, brands, etc., for domestic assembly, but the core technology is still controlled by the foreign side. Joint venture car brands include: Volkswagen, Audi, Mercedes-Benz, BMW, Skoda, Chevrolet, Hyundai, Kia, etc. Among them, the joint venture brands under the FAW Group include: FAW-Volkswagen, FAW-Audi, FAW-Mazda (all produced in Changchun, Jilin), and FAW-Toyota (produced in Changchun, Jilin; Tianjin; and Chengdu, Sichuan).
11
5
Share

What tires does the Geely New Emgrand use?

Geely New Emgrand uses tubeless tires, which are pneumatic tires without inner tubes, also known as low-pressure tires or pneumatic tires. Tubeless tires have high elasticity and wear resistance, as well as good adhesion and heat dissipation performance. The advantages of tubeless tires include: wear resistance, reduced weight, lower fuel consumption, slow air leakage, good heat dissipation, and long service life. The Geely New Emgrand adopts a family-style design and offers two displacement options (1.3T and 1.5L), including 12 configuration models (including the sedan version New Emgrand and the hatchback version RS). In terms of body size, the Geely New Emgrand has a length, width, and height of 4631mm, 1789mm, and 1470mm respectively, with a wheelbase of 2650mm.
8
1
Share

Where is the frame number of an electric vehicle located?

Location of the frame number for electric vehicles: 1. For large electric vehicles, it is generally found on the main frame beneath the front of the vehicle, visible by opening the box above the footboard; 2. For small electric vehicles, the frame number can be checked on the steel frame above the front wheel, usually represented in a purely numerical format. The frame number is the identification number of the entire frame of the electric vehicle, a set of characters assigned by the manufacturer to identify a vehicle. Electric vehicles, also known as electric-driven vehicles, are divided into AC electric vehicles and DC electric vehicles. Typically, electric vehicles use batteries as their energy source, converting electrical energy into mechanical movement through components like controllers and motors, with speed adjusted by controlling the current size.
14
2
Share

What does it mean when the passenger light is on in a car?

When the passenger light is on in a car, it indicates that the passenger airbag is activated. Here is an introduction to airbags: 1. The airbag is a passive safety feature in motor vehicles, which, when used in conjunction with seat belts, provides effective collision protection for passengers; 2. In the event of a car collision, the inflation system can rapidly inflate in less than one-tenth of a second, and the airbag will deploy from the steering wheel or dashboard, protecting the occupants from the impact of a frontal collision; 3. The airbag was first proposed by Hetrick and obtained the U.S. patent for 'Automobile Safety Cushion Assembly.' With the establishment of vehicle safety standards in various countries, the installation rate of airbags has been increasing; 4. Airbags can also be classified according to their installation positions, including front airbags, passenger airbags, side airbags, rear side airbags, side curtain airbags, knee airbags, etc., providing comprehensive protection for drivers and passengers.
18
5
Share

Where is the OBD interface located on the Dongfeng Peugeot 3008?

Peugeot 3008 OBD interface location: The OBD diagnostic interface of the Peugeot 3008 is located in the fuse box position below the left side of the steering wheel. Open the decorative panel and pull it out directly. The OBD interface is that black and green socket. Here is some relevant information about OBD: 1. OBD is the abbreviation of On-Board-Diagnostic, which translates to "On-Board Diagnostic System" in Chinese. This system constantly monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once it detects a situation that may cause excessive emissions, it will immediately issue a warning. 2. When the system fails, the malfunction indicator lamp (MIL) or check engine warning light will illuminate. At the same time, the OBD system will store the fault information in the memory. Relevant information can be read in the form of fault codes through standard diagnostic instruments and diagnostic interfaces. Based on the prompts of the fault codes, maintenance personnel can quickly and accurately determine the nature and location of the fault.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.