How to Replace the Air Conditioning Filter of a New Santana by Yourself?

1 Answers
Adelyn
07/29/25 5:05pm
Method for independently replacing the air conditioning filter of a new Santana: 1. The air conditioning filter of this car is located under the glove compartment on the passenger side. Look upwards at the lower left side of the glove compartment to find a flap secured by three clips, which is the entrance for the air conditioning filter; 2. Open all three clips to see the air conditioning filter, then gently pull it out; 3. During installation, ensure the arrow on the filter points to the left, gently push the filter along the hole, and secure the cover plate. The Santana is a compact car under SAIC Volkswagen, with dimensions of 4475 mm in length, 1706 mm in width, and 1469 mm in height, and a wheelbase of 2603 mm. In terms of suspension, the Santana features a MacPherson strut front suspension and a torsion beam rear suspension.
Was this review help?
10
3
Share
More Forum Discussions

Quickest Solutions for Push-Button Start Failure

Solutions for push-button start failure vary by situation: 1. When the key fob battery is dead: First bring the key as close as possible to the start button (ideally touching it), then press the button. This serves as an emergency workaround, but you should replace the backup key soon. 2. When the steering wheel is locked: Apply force to turn the steering wheel while simultaneously turning the key. 3. When not in Park gear: Whether in Reverse or Drive gear, if ignition succeeds, the vehicle may lurch suddenly during startup. Therefore, most vehicles preset this safety mode - always ensure the gear is in Park position before ignition.
3
5
Share

What is the reason why the fog on the car windshield cannot be blown away?

Window windshield fog cannot be blown away due to the large temperature difference between the inside and outside of the car. The following is an introduction to the relevant content: 1. Classification: Fogging on the front windshield can be divided into internal fogging or external fogging. Whether it is internal or external fogging, the main reason is that the surface temperature of the glass is lower than the air temperature, and the air humidity is relatively high. When warm and humid air encounters the cold front windshield, it releases heat and liquefies, thereby producing fog. 2. Shortest time: Hot air defogging reduces the temperature difference on both sides of the glass in the shortest time to achieve the purpose of defogging.
2
1
Share

What does 'lock' mean on a car?

Car dashboard displaying 'lock' refers to the ignition switch. The four positions of the car ignition switch system are as follows: 1. START: Position for starting the ignition; 2. ON: Powers all electrical components in the car, this is the position during vehicle operation; 3. ACC: Allows activation of some electrical components, such as the radio; 4. LOCK: Function to lock the steering wheel. Activation method: After inserting the key into the ignition switch, briefly pause at each position for about 1-2 seconds. At this time, you can hear the sound of electrical devices powering on, then proceed to the next position.
16
2
Share

What is the horsepower of the Ford Raptor F150?

The Ford Raptor F150 is equipped with an engine that delivers a maximum power output of 380 horsepower. This vehicle features a 3.5T twin-turbocharged engine, which produces a maximum power of 280kW and a peak torque of 672Nm. In terms of the transmission system, the engine is paired with a 10-speed automatic transmission. The Ford Raptor F150 is a pickup truck launched by Ford Motor Company, primarily introduced to the Chinese automotive market through imports. The exterior design of this vehicle is quite refined, with rugged body lines that create a strong visual impact. The front fascia is highlighted by a striking blackened grille design.
14
5
Share

What are 3D car mats?

Automotive 3D mats are one of the most common car accessories, designed to be placed under the seats for foot padding. Here are some tips for choosing automotive 3D mats: 1. Brand: When purchasing, pay attention to the brand of the 3D car mats. Opt for reputable brands recognized by consumers in the industry to ensure product quality and good after-sales service. 2. Anti-slip effect: Anti-slip is the most basic and practical function of car mats, and the same principle applies to 3D mats. Always choose mats with fasteners to prevent shifting and ensure driving safety. 3. 3D effect: The more three-dimensional the mat is for your car, the better it will be, provided it fits properly.
18
0
Share

How to Adjust the Audio System in the Buick LaCrosse?

Buick LaCrosse audio adjustment methods are: 1. The audio settings can be adjusted in the sound effects menu, where the equalizer includes treble, midrange, and bass; 2. You can either tap the screen or directly touch the desired effect with your hand. The Buick LaCrosse is a mid-size sedan with body dimensions of 5026 mm in length, 1866 mm in width, and 1462 mm in height, and a wheelbase of 2905 mm. In terms of power, the Buick LaCrosse is equipped with a 2.0-liter turbocharged engine across all models, delivering 241 horsepower and a maximum torque of 350 Nm. The engine can output maximum power at 5000 rpm and maximum torque between 1500 to 4000 rpm.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.