How to Replace the Air Conditioning Filter in the Tayron?
3 Answers
The method for replacing the air conditioning filter in the Tayron: The air conditioning filter is located above the passenger footwell on the front passenger side. Remove the three clips in this area to pull out the old filter. Insert the new air conditioning filter and reassemble in the reverse order of disassembly. The function of the air conditioning filter is to filter the air blown into the car by the vehicle's air conditioning system, thereby purifying the air inside the car and ensuring the health of the occupants. The Tayron is a mid-size SUV under FAW-Volkswagen. The front suspension uses a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. In terms of body dimensions, the Tayron measures 4589mm in length, 1860mm in width, 1660mm in height, with a wheelbase of 2731mm.
I changed the air filter for my Tayron myself and found it quite simple. Everyone can give it a try. First, park the car on a flat surface, turn off the engine, and open the glove compartment on the passenger side. Empty the contents inside to avoid losing any small parts. There are limit clips on both sides of the glove compartment—just press or twist them to release, then easily pull it down. Behind it, you'll see a rectangular cover, usually made of black plastic, which can be removed by pinching both sides. The old filter is inside, likely dirty and covered in dust—just pull it out. Remember its installation direction; the arrow should point downward—don't insert it backward. Opt for an activated carbon filter for better odor and pollen protection, which can be bought cheaply online. After placing the new filter, snap the cover back on and push the glove compartment up to secure it. The whole process takes about ten minutes. Regularly changing the filter improves cabin air quality—once a year is enough, saving you unnecessary expenses at the repair shop. Be careful not to force anything; the Tayron is designed quite user-friendly, but if parts break, replacing them can be more troublesome.
I often help friends with car repairs, and the key to replacing the cabin air filter lies in the details. For the Tayron, the filter is located behind the glove box. Open it and clear out any clutter, paying attention to the plastic clips on both sides—press them gently to release; avoid pulling hard to prevent breakage. Then, move the glove box aside to reveal the filter cover, pinch open the clips on both sides, and pull out the old filter. Check the arrow markings to ensure the new filter is installed in the correct direction to avoid obstructing airflow. It's recommended to replace the filter every year or every 20,000 kilometers, preferably with an activated carbon filter for better filtration. The whole process is quick and simple, but be careful not to damage any wiring during the operation. When reinstalling the glove box, make sure it clicks securely into place. Choosing a reputable brand of filter is crucial, as low-quality ones may leak dust and affect the AC system. Having tools like a screwdriver or gloves ready beforehand makes the job easier and safer.
