How to Replace the Air Conditioning Filter in the New Santana?

2 Answers
VanCarter
07/25/25 2:01am
The method for replacing the air conditioning filter in the New Santana: 1. The air conditioning filter is located below the glove compartment on the passenger side, specifically at the lower left of the glove compartment; 2. Looking upwards, you will see a flap secured by three clips—this is the entry point for the air conditioning filter; 3. Open all three clips to reveal the air conditioning filter; 4. Gently pull it out, ensuring the arrow on the new filter points to the left during installation; 5. Carefully push the new filter into the slot and secure the flap to complete the replacement process. The Santana is a brand of cars produced by Volkswagen in California, USA. The New Santana completely abandons the boxy design of the 1970s seen in the older models, adopting a more modern, stylish, and dynamic appearance, aligning with the latest design language of the Volkswagen family.
Was this review help?
16
5
Share
ClaireLynn
08/10/25 4:24pm
As a beginner in car maintenance, I find it quite easy to replace the air conditioning filter on the new Santana. Here are the specific steps: First, prepare a new filter, with the model number available online or at a dealership. Sit in the passenger seat, open the glove box, and gently press the clips on both sides of the box or unscrew the screws to remove the glove box. Behind the box, there is a small cover; open it and pull out the old filter, then discard it. When inserting the new filter, pay attention to the arrow direction indicated on it—the arrow should point toward the rear of the car to avoid incorrect installation, which could affect filtration efficiency. The whole process requires no professional tools and takes about ten minutes, making it perfect for beginners to practice. It is recommended to replace the filter every six months or every 10,000 kilometers to significantly improve cabin air freshness, reduce allergies caused by pollen and dust, and ensure a comfortable and healthy driving experience. Doing it yourself saves money on repair shop costs and enhances your understanding of your beloved car.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What does 'range' mean on a car dashboard?

On a car dashboard, 'range' refers to the remaining driving distance, indicating how much farther the car can travel. This distance is calculated based on average fuel consumption, representing the theoretical remaining mileage with the current fuel level in the tank. A car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front/rear fog light indicators, and warning lights. Different cars have varying dashboard configurations. However, conventional dashboards typically include a speedometer, tachometer, oil pressure gauge, coolant temperature gauge, fuel gauge, and charging gauge. Vehicle fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and ambient temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching traffic lights can increase fuel consumption. The vehicle itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger engines typically produce more power and require more gasoline for combustion. Heavier vehicles also have higher fuel consumption due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against strong winds increases vehicle resistance and fuel consumption. Low ambient temperatures: When the engine block is cold, injected gasoline doesn't atomize easily during cold starts, requiring more fuel for combustion and increasing consumption. Additionally, the engine control unit may maintain higher idle speeds to warm up the engine in cold weather, further increasing fuel usage.
20
1
Share

How to Reset the Tire Pressure Light on the Teramont?

The tire pressure light on the Teramont can be reset by locating and holding down the tire pressure reset button. Tire pressure reset is an operation performed on the tire pressure monitoring system to reset it after addressing any tire pressure issues. Steps to reset the tire pressure on the Teramont: First, turn on the ignition, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and may lead to drifting, compromising driving safety; Increases movement in various parts of the tire, causing excessive rolling and abnormal heating; Reduces the functionality of the cords and rubber, leading to delamination or cord breakage, excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may cause a blowout; Increases tire body deformation, making the tire sidewalls prone to cracking and inducing flexing movements, leading to excessive heat, accelerating rubber aging, fatigue in the cord layers, and cord breakage. It also enlarges the tire's contact area with the ground, accelerating wear on the tire shoulders.
7
1
Share

How to turn on Lexus TRC after it's turned off?

After turning off the vehicle, the Lexus TRC will be deactivated. Then restart the car to automatically activate the TRC. Alternatively, press the button on the steering wheel to activate the TRC system.
11
2
Share

What are the steps to lift up the Lexus wiper?

Move the vehicle's wiper combination switch back to the off position to turn off the rear wiper function. Once the wiper stops moving, lift the wiper arm forward to raise the wiper upright.
4
5
Share

How to adjust the headlight height of Lexus RX270?

First, enter the Lexus RX270 vehicle. The headlight height adjustment knob is located below the left side of the steering wheel. Then, you can adjust the headlight projection height using this knob. The lower the corresponding number on the knob, the higher the projection height (when set to 0, the projection height is the highest).
2
5
Share

How to Reset the Mileage on a Levin?

You can try switching the display to trip meter "A" while the engine is running, then turn off the engine switch. When pressing the trip meter reset button, switch the engine to the "ON" position (do not start the engine as this will cancel reset mode). Hold the switch continuously until the trip meter displays "0".
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.