How to Replace the Air Conditioning Filter in the New Sagitar?
3 Answers
The air conditioning filter in the new Sagitar is located on the passenger side, beneath the glove compartment, near the center console. It can be seen by looking up from the floor. There are three clips in total, which can be gently pried open to reveal the air filter. The steps to replace the air conditioning filter are as follows: 1. First, open the glove compartment cover. Locate the fixed clip on the right side of the glove compartment and pull it outward with force. 2. Remove the fixed clip of the glove compartment cover to detach it. 3. Squeeze both sides of the glove compartment towards the center with both hands, and the glove compartment can then be removed. 4. After removing the glove compartment, you will see the air conditioning filter cover. Press the fixed clips on both sides of the cover with force, and the cover can be removed. Below is some related information about the air conditioning filter: (1) The air conditioning filter is used to filter the intake air quality from inside or outside the vehicle. The engine air filter, on the other hand, refers to the engine intake system and serves to filter the engine's intake air. (2) The two have different functions. Generally, the replacement cycle for the engine air filter is based on air quality and mileage, while the replacement cycle for the air conditioning filter is once a year or every 20,000 kilometers.
Replacing the air filter in the new Sagitar is something I've done several times myself, and it's quite straightforward. First, let's talk about its location—it's under the dashboard in front of the passenger seat, covered by a plastic lid. Prepare a flathead screwdriver or a socket wrench. After opening the glove box, you'll find a small drawer-like cover panel. Unscrew the fixing screws to remove it. At this point, you can see the old filter. Carefully pull it out, paying attention to the arrow direction. The new filter must be inserted in the correct direction; otherwise, the air filtration efficiency will be poor. Once installed, just put the cover back on and tighten the screws. The whole process takes less than 15 minutes. As a car enthusiast, I recommend replacing it every 10,000 kilometers or every six months—it saves money and improves the air quality inside the car, especially when the outdoor air quality is poor, making breathing more comfortable. Regularly performing this kind of DIY maintenance also helps avoid issues like fan blockage, killing two birds with one stone.
After replacing the air filter on my new Sagitar, I found this task incredibly practical. Usually, I park the car on level ground, open the glove compartment cover, locate the square-shaped baffle inside, and easily unscrew the bolts with a small wrench to pull it out. The old filter might be covered in dust—just gently pull it out while noting its orientation. Then, insert the new filter according to the arrow direction and secure it in place. The whole process takes just about 10 minutes once you get the hang of it. If unsure, you can always refer to the owner’s manual or online tutorials. Doing regular DIY maintenance not only saves money on repair shops but also helps you gain knowledge. Timely replacement improves AC airflow efficiency, prevents odors, and benefits the whole family’s health.
