How to Replace the Air Conditioning Filter in the Mazda3 Axela?
3 Answers
The steps to replace the air conditioning filter in the Mazda3 Axela are as follows: 1. Open the glove compartment on the passenger side; 2. Remove the plastic clips on both sides of the glove compartment, being careful not to use excessive force to avoid breaking the clips; 3. After removing the clips, pull the glove compartment outward to take it off; 4. Once the glove compartment is removed, you will see the air conditioning filter. Replace it with a new one and reassemble the glove compartment by reversing the disassembly steps. The Mazda3 Axela is a compact sedan under Changan Mazda, with dimensions of 4662mm in length, 1797mm in width, and 1445mm in height, and a wheelbase of 2726mm. In terms of suspension, the Mazda3 Axela features a MacPherson strut front suspension and a torsion beam rear suspension.
I've been driving the Mazda3 Axela for three to four years and have changed the cabin air filter multiple times myself. It's quite straightforward. First, you need to locate the correct position behind the glove compartment on the passenger side. Open the glove box, empty its contents, and take your time—no need to rush. There are damping rods or clips on both sides of the glove box; gently press them to release. Once the entire glove box is removed, you'll see a rectangular filter cover at the back, usually designed with plastic clips that open with a simple press. When pulling out the old filter, remember the arrow direction or take a photo with your phone to ensure the new filter is installed the same way. Make sure not to buy the wrong filter model—activated carbon filters offer better filtration. After replacing, reassemble the glove box and secure the clips to prevent loosening. The whole process takes no more than ten minutes and requires almost no tools. It's recommended to change it once a year, especially during rainy seasons when bacteria accumulate, as this can significantly improve air freshness inside the car and reduce odors. Doing it yourself saves on repair costs and gives a real sense of accomplishment.
As a car enthusiast who often does DIY maintenance, the location for replacing the air filter in the Mazda3 (Axela) is clearly inside the glove compartment on the passenger side. Step 1: Open the glove compartment and remove any items. Step 2: Check the fixing hooks or damper rods on both sides, gently remove them to let the compartment drop. Step 3: Expose the filter compartment cover, open it, and take out the old filter, paying attention to the arrow pointing downward indicating the air inflow direction. Step 4: When placing the new filter, ensure the correct orientation to avoid reverse installation and airflow blockage. Step 5: Reattach the glove compartment and click it into place. Don't forget to choose a filter with high filtration efficiency, such as one with PM2.5 protection. The entire process can be done with zero experience, requiring only your hands as tools. Regular replacement can improve air conditioning efficiency, reduce blower noise, and protect health. It's recommended to check every 10,000 kilometers and replace the filter early if it's dirty.
