How to Replace the Air Conditioning Filter in Emgrand GL?
4 Answers
Replacing the air conditioning filter in the Geely Emgrand GL involves the following steps: 1. Open the glove box and release the clips on both sides by pulling them with your fingers. 2. Lift the glove box upwards to remove the clips. 3. After lowering the glove box, you will see a black cover plate; press the clips on both sides to remove the cover and expose the air conditioning filter. 4. Take out the old air conditioning filter and replace it with a new one. Below are the functions of the air conditioning filter in the Geely Emgrand GL: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, providing strong and long-lasting moisture adsorption.
As a seasoned DIY car mechanic, I find changing the air conditioning filter for the Emgrand GL quite straightforward. First, turn off the engine for safety, then open the glove compartment on the passenger side. There are usually two clips or screws to remove—just gently pull to take the whole thing out. Next, pull out the old filter, which might be shockingly black with dirt, but don’t be surprised—that’s just normal dust buildup. Insert the new filter, making sure it’s oriented correctly—the arrow should point in the direction of airflow. Reinstall the glove compartment and secure the clips. The whole process takes about 10 minutes, and all you need is a Phillips screwdriver. I recommend changing it regularly since the filter blocks dust and pollen, protecting respiratory health. On long drives, the air stays fresher, and the car remains odor-free for a more comfortable ride. Before buying a filter, check the model—the Emgrand GL often uses activated carbon filters, which cost just a few dozen yuan online, much cheaper than at repair shops.
I'm a total car newbie and recently learned how to change the cabin air filter for my Emgrand GL. It's actually not as difficult as I imagined. You'll need to prepare a new filter - I found the matching one by searching 'Emgrand GL cabin air filter' on Taobao, got it for just tens of yuan. Then sit in the passenger seat, open the glove box, and you'll see a small cover that needs to be pushed open - I could pry it open with just my fingers, revealing the filter compartment. The old filter had some odor when taken out due to accumulated dust from not being changed for too long. Just align the new filter with the slot and push it back in, making sure not to insert it backwards. The whole process is straightforward and takes about 5 minutes. I recommend doing it in a ventilated area and wearing gloves to prevent dust exposure - even beginners can handle it easily. Test the AC immediately after replacement - the air becomes much fresher, which is better for family health, especially since my child often rides in the car, reducing allergy risks. Regular replacement can extend the AC system's lifespan, saving both repair shop costs and waiting time.
As an office worker, I took some time to study the replacement of the Emgrand GL's cabin air filter, and the process is super quick. Just open the glove box, remove the panel, take out the old filter, and install the new one in the correct direction. Each replacement only takes me 5 minutes, with low cost and improved air quality inside the car. Having the filter and tools ready in advance is the most convenient.
