How to replace the air conditioning filter in Changan CS75?

How to reset the maintenance light on the Senova D50?

The method to reset the maintenance light on the Senova D50 is as follows: With the ignition switch turned off, press and hold the reset button, then turn the ignition switch to the 'on' position and release the reset button. Press and hold the info button for a few seconds until you see the maintenance reset option, then press info to confirm the selection, and finally press reset to complete the maintenance light reset. The Senova D50 is the first A-class family sedan under the Senova brand, with dimensions of 4582mm in length, 1794mm in width, and 1486mm in height, and a wheelbase of 2670mm. In terms of appearance, the front face of the Senova D50 adopts a family-style design, featuring a single horizontal bar grille with extensive chrome accents, and the headlight cluster design complements the fog lights, creating a popular X-shaped front face design.

20

0

Share

What are the body dimensions of the Cadillac XT5?

The Cadillac XT5 has body dimensions of 4812mm in length, 1903mm in width, and 1680mm in height, with a wheelbase of 2857mm. The Cadillac XT5 adopts the design concept of the BFI integrated high-strength frame assembly, achieving lightweight and high strength through optimized frame design, efficient material application, and innovative joining processes. The Cadillac XT5 offers two differently tuned 2.0T turbocharged direct-injection engines, with maximum power outputs of 184 kW and 198 kW respectively, both delivering a maximum torque of 400 Nm. These engines are paired with an 8-speed automatic manual transmission featuring Start-Stop energy-saving technology.

7

2

Share

How to Use the Rain-Sensing Wipers on the Passat?

How to use the rain-sensing wipers on the Passat: 1. Pull the lever towards the driver to spray windshield washer fluid onto the windshield; 2. The default position is INT, where the wipers automatically activate when the vehicle detects increased rainfall, with the sensitivity adjustable via the button on the right; 3. Push the lever upward to gradually increase the wiper frequency, with LOW being the low-speed setting and HIGH the high-speed setting; 4. The OFF position turns the wipers off, while 1X makes the wipers operate once before returning to their original position. The Passat is a front-wheel-drive sedan powered by a water-cooled engine, measuring 4870 mm in length, 1834 mm in width, and 1472 mm in height, with a wheelbase of 2803 mm. It features front-wheel drive, a front MacPherson strut suspension, and a rear multi-link independent suspension.

15

4

Share

What is the function of the HOLD button?

The function of the HOLD button is a derivative feature of electronic parking. The HOLD button adjusts the optimal driving state according to different road conditions, effectively preventing the transmission from frequently shifting gears on poor road surfaces and serving as a forced downshift (without upshifting) during overtaking. When the HOLD button is pressed in D gear, the transmission will remain in second, third, or fourth gear (primarily fourth gear). When pressed in 3rd gear, it will stay in second or third gear (primarily third gear). When pressed in 2nd gear, it will remain in second gear, and when pressed in 1st gear, it will stay fixed in first gear. Using this button does not harm the transmission. Scenarios where the HOLD function can be used: Slippery surfaces, such as starting on snow. Starting in 2nd gear on snow is smoother than starting in 1st gear. When starting on snow, the gear lever can be placed in position 2, and pressing HOLD will keep the transmission in the 2nd gear ratio, ensuring a smoother start. Continuous winding roads can cause the automatic transmission to shift frequently. Pressing the HOLD button in D4 gear activates the hold mode, keeping the transmission in 3rd gear. This not only reduces transmission wear but also allows the transmission to continuously deliver greater torque during driving, improving acceleration performance and ensuring a smoother ride. When driving on mountain roads or continuous slopes, pressing the HOLD button in D4 or 2nd gear activates the hold mode. This provides stronger acceleration when going uphill and greater engine braking (drag) when going downhill, enhancing safety and avoiding wear caused by frequent gear shifts.

2

5

Share

Under what circumstances does the ABS system activate?

Generally, when the vehicle is in motion and the brakes are applied abruptly, the ABS system will activate, accompanied by a warning light flashing on the dashboard. The primary function of the ABS system is to prevent wheel lock-up and loss of steering control, rather than to reduce braking distance. The Anti-lock Braking System, commonly referred to as ABS, remains in a default activated and standby state unless a malfunction occurs, and it cannot be manually deactivated or turned off. The Anti-lock Braking System works by using sensors installed on the wheels to detect when a wheel is about to lock up. The controller then commands the modulator to reduce the hydraulic pressure in that wheel's brake cylinder, decreasing the braking torque. After a brief period, the original hydraulic pressure is restored. This cycle repeats continuously, ensuring that the wheels remain in a rotating state while still applying braking torque.

3

Share

Where is the coolant temperature sensor located on the Audi A3?

The coolant temperature sensor on the Audi A3 is installed at the position where the circulating water returns to the radiator in the engine. The coolant temperature sensor can detect the temperature inside the engine. Generally, vehicles are equipped with a thermostat, so the temperature is always maintained at around 90 degrees. The Audi A3 is a sedan model produced by Audi, developed based on the Volkswagen MQB platform. The body features lightweight design and aluminum materials. In terms of power, it is equipped with multiple engines including 1.4 TFSI and 1.8 TFSI. The front suspension of the Audi A3 chassis is a MacPherson strut type, while the rear axle adopts a torsion and crank-type structure with separately arranged springs and shock absorbers. In addition to excellent handling, the rear suspension layout also offers high space utilization.

6

2

Share

How to replace the air conditioning filter in Changan CS75?

How to reset the maintenance light on the Senova D50?

What are the body dimensions of the Cadillac XT5?

How to Use the Rain-Sensing Wipers on the Passat?

What is the function of the HOLD button?

Under what circumstances does the ABS system activate?

Where is the coolant temperature sensor located on the Audi A3?

What are the precautions for driving on icy roads?

How to Turn Off the Rear Wiper on Volkswagen Touareg?

Can the Leopaard CS9 New Energy use green new energy license plates?

How to Open the Trunk of the New Bora?