How to Replace the Air Conditioning Filter in an Old Sagitar?
2 Answers
Volkswagen Sagitar's air conditioning filter is located slightly above the passenger side footwell. It is recommended to replace the air conditioning filter every year, and it can be replaced together with the air filter. Below are the replacement steps: 1. Locate the lower panel in the passenger side footwell and find two plastic screws. You can loosen them by hand or with a tool, then remove the panel. 2. You will see the air conditioning filter cover. Release the clips around it by hand to open the cover, then remove and replace the air conditioning filter. Pay attention to the arrow direction during installation to ensure the filter provides maximum filtration. Finally, tidy up your tools and clean any debris inside the car.
As a DIY-loving car owner, I frequently change the air conditioning filter for my old Sagitar, and the process is actually quite simple. First, prepare a Phillips screwdriver and a new filter—selecting the correct model is crucial, usually an OEM-matched one bought online will do. The filter is located under the glove compartment; just lift the floor mat to reveal a small cover panel. Use the screwdriver to remove the screws on the cover panel, then gently take it off without forcing it to avoid damage. Next, remove the old filter, which is often clogged with dust and debris. If not replaced, it can lead to poor air quality in the car and even trigger allergies. When installing the new filter, pay attention to the arrow direction, align it with the slot, and ensure a snug fit. Reattach the cover panel and tighten the screws to complete the job—the whole process takes about 15 minutes and saves around 80-100 yuan in labor costs. Doing it yourself not only saves money but also hones your DIY skills. Remember to check the filter every 10,000 kilometers or roughly once a year.
