How to Replace the Air Conditioning Filter in an Audi A3?

What Causes the Engine Oil Light to Illuminate?

The reasons for the engine oil light to illuminate: 1. Excessive oil viscosity; 2. Blockage or improper adjustment of the pressure relief valve; 3. Insufficient oil level; 4. Excessive scale in the engine cooling system, poor heat dissipation, prolonged overload operation, or excessively delayed fuel injection timing causing engine overheating; 5. Malfunction of the oil bypass valve; 6. Clogged oil filter. If the oil pressure indicator light comes on after starting, do not continue driving. The first step is to check the oil dipstick to see if the oil level is normal. Add oil if necessary. If no issues are found during the check, proceed to the nearest repair shop for inspection.

16

4

Share

Where is the windshield washer switch located on the Emgrand GL?

The windshield washer switch on the Emgrand GL is located on the wiper control stalk on the right side of the steering wheel. Operating the washer is very simple - just pull the stalk toward yourself to spray washer fluid. Note that if no fluid sprays when pulling the stalk, do not repeatedly operate it, as this may indicate the washer fluid reservoir is empty. In this case, check and refill the washer fluid before operating again. The Emgrand GL measures 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm. Its main competitors in the Chinese compact car segment include the Arrizo 7, Changan Eado, all-new Besturn B50, and Roewe 360. The Emgrand GL boasts superior body length and wheelbase dimensions compared to other vehicles in its class.

11

2

Share

How to Turn Off the Highlander Auto Start-Stop?

To turn off the Highlander auto start-stop, follow these steps: The auto start-stop switch for the Highlander is located on the left side of the steering wheel. Pressing the stop and start cancel button will disable the stop and start system, and the dashboard will display a corresponding message. Pressing the button again will re-enable the system. Additional information: 1. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a traffic light) and restarts it when it's time to move again. 2. This system works by incorporating an enhanced motor with idle start-stop functionality into the engine, allowing the engine to completely shut off when idle stop conditions are met. When the vehicle needs to move again, the idle start-stop motor system quickly responds to the driver's start command, restarting the engine seamlessly. 3. This technology can save up to 5% of fuel under normal driving conditions and up to 15% in congested traffic.

9

1

Share

Why Shouldn't You Upshift When Overtaking?

Because the moment you upshift, the engine RPM immediately drops while the vehicle speed remains unchanged. Simultaneously, due to the reduced transmission ratio, the torque output from the engine to the wheels also decreases. After completing the upshift, although you can accelerate by pressing the throttle, the reduced torque output results in slower acceleration. Precautions for downshifting before overtaking: 1. Do not use downshift overtaking when the current gear has already reached its maximum speed or when the current speed exceeds the maximum speed of the lower gear. 2. If the current gear still has sufficient acceleration capability or the current speed is already adequate to overtake the target vehicle within a short time, downshift overtaking is unnecessary. 3. Although downshift overtaking can shorten the overtaking process, frequent use of this method will increase fuel consumption.

14

5

Share

What does the license plate in Nantong start with?

Nantong license plates start with the abbreviation of Jiangsu, which is 'Su', followed by a letter. The license plate codes for various cities in Jiangsu Province are as follows: SuA is Nanjing, SuB is Wuxi, SuC is Xuzhou, SuD is Changzhou, SuE is Suzhou, SuF is Nantong, SuG is Lianyungang, SuH is Huaian, SuJ is Yancheng, SuK is Yangzhou, SuL is Zhenjiang, SuM is Taizhou, and SuN is Suqian. Nantong is the northern gateway city of the Shanghai metropolitan area, one of China's first 14 coastal cities to open to the outside world, the economic center of the northern Yangtze River Delta, a modern port city, and a national historical and cultural city.

17

5

Share

How to Identify If a Car Is from Stock?

Methods to check if a car is from stock are as follows: 1. Check the production nameplate: Usually, there is a vehicle nameplate on the lower part of the B-pillar on the right side (passenger side) of the car, which indicates the production date of the vehicle, engine parameters, and other information, making it easy to see at a glance. 2. Check the glass: The production date of the car glass is marked on it, with numbers representing the year and black dots representing the month. If the black dots are in front, subtract the number of dots from 7; if they are behind, subtract from 13. The result is the month. 3. Check the tires: This may not be 100% accurate in determining if the car is from stock, but the production date of the tires can give a rough estimate of the manufacturing time. The four-digit code indicates the week (first two digits) and the year (last two digits).

17

5

Share

How to Replace the Air Conditioning Filter in an Audi A3?

What Causes the Engine Oil Light to Illuminate?

Where is the windshield washer switch located on the Emgrand GL?

How to Turn Off the Highlander Auto Start-Stop?

Why Shouldn't You Upshift When Overtaking?

What does the license plate in Nantong start with?

How to Identify If a Car Is from Stock?

How to Turn on the Heater in a BMW?

Is there a bulge on the sidewall of the tire?

Why does the vehicle cross the line during curve driving?

Has the Ford Escort's Fog Light Been Removed by Changan Ford?