How to Replace Honda Wiper Blades?

1 Answers
MacHaley
07/30/25 12:29am
Here is the method to replace Honda wiper blades: 1. Lift the U-shaped wiper arm (note: first close the engine hood, as an open hood may hinder replacement and installation); 2. Align the wiper connector; 3. Hook the connector; 4. Press the buckle to complete installation; 5. Gently lower the wiper and test the water spray and wiping effect (avoid wiping without spraying water, as this may damage the rubber blade, and dusty windshields may even get scratched). Replace the wiper when the following situations occur: 1. Multiple horizontal streaks appear after windshield wiping; 2. Areas are missed during wiping (caused by rubber blade aging); 3. Shaking noise occurs (due to loose wiper connection, excessive gap, or improper angle adjustment).
Was this review help?
19
2
Share
More Forum Discussions

Where is the light switch for the Volvo XC90?

The light switch for the Volvo XC90 is located on the stalk switch below the steering wheel. Turn it to the designated position, and the corresponding exterior lights will illuminate, while the dashboard will also display the corresponding indicator. The Volvo XC90 has a length, width, and height of 4953mm, 1958mm, and 1776mm respectively, with a wheelbase of 2984mm. The front suspension of the Volvo XC90 is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 250PS, a maximum power of 184kW, and a maximum torque of 350Nm, paired with an 8-speed automatic transmission.
4
1
Share

What are the effective ways to save fuel for cars?

Effective ways to save fuel for cars include: maintaining an appropriate speed, reducing vehicle weight, ensuring proper tire pressure, minimizing brake usage, using air conditioning sparingly, avoiding unnecessary throttle presses and sudden braking, and maintaining the correct gear. Maintaining the correct gear means shifting up in time when the speed increases or the engine reaches a certain RPM. Methods to check car fuel consumption: Most onboard computers display the average fuel consumption value on the dashboard, but this often differs from the actual fuel consumption. Fuel consumption refers to the fuel economy indicator of a car driving at a constant speed on good road conditions. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted.
18
0
Share

How many kilometers should the Mazda Atenza alternator belt be replaced?

The Mazda Atenza alternator belt should be replaced every 60,000 to 80,000 kilometers. If you frequently drive on highways, it is recommended to replace it around 60,000 kilometers. The alternator belt is one of the main belts in a car, connecting components such as the alternator, air conditioning compressor, power steering pump, idler pulley, tensioner pulley, and crankshaft pulley. The power source for the alternator belt is the crankshaft pulley, with the rotation of the crankshaft providing the necessary power. Taking the 2020 Mazda Atenza as an example, its body dimensions are 4870 mm in length, 1840 mm in width, and 1445 mm in height, with a wheelbase of 2830 mm. This model is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 116 kW and a maximum torque of 202 Nm, paired with a 6-speed automatic transmission.
13
5
Share

How to Adjust the Audio System in Volkswagen Passat?

Volkswagen Passat's audio system can be adjusted in the 'tone' settings, where you can set the music genre, bass and treble, loudness, and the volume of front, rear, left, and right speakers. The dimensions of the Volkswagen Passat are: length 4933mm, width 1836mm, height 1469mm, with a wheelbase of 2871mm and a fuel tank capacity of 68.5 liters. The front suspension of the Volkswagen Passat is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
2
3
Share

Where is the windshield washer fluid filler port on the Sylphy?

The windshield washer fluid filler port on the Sylphy is located at the lower left corner of the engine compartment. The filler port is marked with a symbol resembling a windshield washer icon. Simply open the cap to add the fluid. Windshield washer fluid, commonly known as glass water, is a type of automotive consumable used for cleaning the windshield. Taking the 2021 Sylphy as an example, its body dimensions are 4631 mm in length, 1760 mm in width, and 1503 mm in height, with a wheelbase of 2700 mm and a fuel tank capacity of 50 liters. This model is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90 kW and a maximum torque of 155 Nm, paired with a 5-speed manual transmission.
13
1
Share

How to Set One-Touch Up/Down for Windows on the New Sagitar?

Method to set one-touch up/down for windows on the new Sagitar: Raise the window completely upward, then hold the switch for 3 seconds. Next, lower it completely and hold for another 3 seconds. Repeat this process three times to complete the setup. The Sagitar comes standard with one-touch window control across all trims, which refers to a system that allows the car's windows to be fully opened or closed with a single press of the button. Taking the 2021 Sagitar as an example, it is a compact car with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, featuring a wheelbase of 2731mm and a curb weight of 1355kg. This model is equipped with a 1.2T turbocharged engine delivering a maximum horsepower of 116PS, peak torque of 175Nm, and maximum power output of 85kW, paired with a 5-speed manual transmission.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.