How to Replace Coolant in ix35?
2 Answers
Here are the steps to replace coolant in ix35: 1. Unscrew the radiator cap and open the radiator drain valve, usually located at the bottom of the car, to drain the coolant. 2. Clean the cooling system by continuously injecting clean water into the engine cooling system. During the flushing process, keep the engine idling to maintain the flow of clean water inside until clear water comes out from the radiator. 3. Stop injecting water, wait for the water to drain completely, and then close the drain valve. 4. Fill with new coolant until the liquid level is between the max and min marks. 5. Close the cap, start the car, and let the engine idle for two to three minutes. The cooling system will expel internal air, causing the coolant level to drop slightly. At this point, you should replenish the coolant again.
As a DIY car enthusiast, changing the coolant is actually quite enjoyable. Here are the steps for a Hyundai ix35: First, wait for the engine to cool down—don’t rush and risk burning yourself. I usually prepare a wrench, a container, and the specific coolant. Locate the drain plug at the bottom of the radiator, loosen it to let the old fluid drain out, and once it’s mostly empty, screw it back in. Then, add the new coolant, paying attention to the mixing ratio—50% coolant and 50% distilled water is ideal—and pour it directly through the radiator cap opening. Don’t forget to bleed the air by starting the engine and letting it run for a few minutes, then check if the fluid level stabilizes. I take a quick look during my weekly maintenance to avoid system blockages or leaks. Coolant isn’t just for winter—it protects the engine from corrosion and rust. I recommend replacing it every 20,000 km or two years to prevent minor issues from turning into costly repairs. Keeping your car in top condition ensures peace of mind on the road.
