How to Replace Citroen Wiper Blades?

[LaAdalynn]

Lift the wiper spring arm to make the wiper stand upright, press the plastic block inside, and with the other hand push upwards to pull out the wiper blade. The removed wiper blade has a plastic cap at each end. Use a screwdriver to pry open the fixed cap with slight force, and the rubber strip can then be smoothly pulled out from it. The rubber strip has 2.5 layers from inside to outside. Fit the innermost layer into the groove of the wiper blade, insert it, secure the metal clip to fix it, and then cover it with the plastic cap. This is the reverse step of the first step. Align the square protrusion with the small hole on the spring arm and snap it into place.

[KeeganRose]

Replacing the wiper blades on a Citroën is actually quite simple. I often do it myself to avoid unnecessary expenses at the shop. First, park the car on a level surface and turn off the engine to prevent the wipers from moving and causing injury. Then, lift the wiper arm vertically away from the windshield—handle it gently and avoid forcing it, as this could scratch the glass or damage the linkage. Next, locate the connection point between the wiper blade and the arm. Most Citroën models use a clip design; press the button or apply a bit of finesse to remove the old blade. After removal, take out the new wiper blade, ensuring it matches your car's model and size, align it with the slot, and push until you hear a click, indicating it's securely locked. Finally, lower the arm back and test the wiping effect with some windshield washer fluid—adjust the angle if it doesn’t clean smoothly. A word of caution: avoid doing this in freezing winter temperatures, as the rubber can become brittle and break. Regularly inspect the wiper blades for wear every six months and replace them promptly to enhance driving safety.

[McBlakely]

I think replacing Citroën wiper blades is perfect for DIY, the whole operation takes no more than five minutes. First, make sure the car is parked and the engine is turned off, then lift the wiper arm to stand it upright—this protects the windshield from scratches. Most Citroën wipers use a universal clip structure; simply press the middle clip to remove the old blade. When installing the new blade, pay attention to the direction to avoid putting it on backward. Align it with the slot and push until you hear a click, which means it's securely fixed. During the testing phase, spray some water and run the wipers a few times to check for even wiping. If there are no issues, you're done. I also like to clean the glass surface of any oil film while I'm at it, to prevent premature wear on the new wiper blades. I recommend buying good-quality replacement parts, as they last longer and save you from frequent changes. Overall, this is a simple maintenance task—why bother a technician when you can do it yourself?

[ConnorFitz]

Replacing Citroën wiper blades is straightforward: first lift the arm without touching the glass, then remove the old blade by pressing the release button, install the new blade by firmly inserting it, and finally test with washer fluid. The process is simple—just apply some finesse instead of brute force, as Citroën's clip design is quite stable. When selecting new blades, ensure you buy the correct size matching your model; wrong sizes won't fit no matter how hard you try. After installation, wipe a few times to confirm no noise or streaks, otherwise reinstall. Generally, there are no complicated steps—just keep the operation smooth and light.