···
Log in / Register

How to Replace Car Wiper Blades?

3 Answers
DiMaddox
07/28/25 8:21am
Methods for replacing car wiper blades: 1. Lift the metal wiper arm away from the windshield and keep it steady in a position perpendicular to the windshield; 2. Press the tab to remove the old wiper blade; 3. Insert the new wiper blade and gently rotate it; 4. Snap the hook into place to secure it, then return the wiper to the windshield. Maintenance methods for car wiper blades: 1. Always spray windshield washer fluid when using wiper blades—never operate them dry; 2. Do not use wiper blades on stubborn or hard debris—clean these manually instead; 3. When lifting wipers during car washing or routine cleaning, hold only the spine of the wiper.
Was this review help?
7
1
Share
DelSerenity
08/11/25 3:15pm
I've been driving for over a decade, and changing wiper blades is a simple task. Before buying new blades, check your car model or measure the old blades to avoid getting the wrong size. After turning off the engine, gently lift the wiper arm and press a small tab to slide out the old blade—be careful not to let the arm snap back and shatter the windshield. Align the new blade with the slot, push it in until you hear a 'click' to secure it. Test by spraying water and ensure the windshield is clean. Replace them every six months, especially before the rainy season—clear visibility ensures safe driving, as worn rubber won’t wipe raindrops effectively. Avoid cleaning the blades with dirty cloths to extend their lifespan and save money.
Was this review help?
7
5
Share
Expand All
DeEllie
09/28/25 3:02am
I often use mobile apps to check car models when selecting wiper blades. Before buying online or in-store, always confirm the connection type, such as hook or U-shaped connectors. Park the car and turn off the engine, lift the wiper arm gently without using excessive force, locate the release button, press it to detach the old blade, and remove it directly. Hold the new blade steady, align it properly, and install it without forcing it to avoid damaging the connector. After installation, turn on the wipers to test the smoothness of the swing and water removal. Choose cold-resistant wiper blades to prevent freezing in winter, and clean off dirt with washer fluid after rainy days. This DIY approach saves money and teaches a handy skill.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

Where is the generator located?

Generator is usually located in front of the engine. You can see it by looking down after opening the engine hood. The generator is a very important component in a car, as it generates electricity to power all the electrical equipment in the vehicle. When the engine is not started, the battery supplies power to all electronic devices and is also responsible for starting the engine. A car cannot operate without electricity. The ignition system, fuel supply system, and ECU of the car engine all require electricity to function. If power is cut off while driving, the engine will stall, causing the car to break down. If the generator fails during driving, the car will use the electricity stored in the battery.
18
3
Share

What are the body dimensions of the Audi A3?

Audi A3 body dimensions: length 4312mm, width 1785mm, height 1426mm, with a wheelbase of 2629mm. The Audi A3 is a sedan product produced by Audi, developed based on the Volkswagen MQB platform. The body features lightweight design and aluminum materials, and is powered by multiple engines including 1.4TFSI and 1.8TFSI. The front suspension of the Audi A3 uses MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The lines of the Audi A3's tailgate are more rounded and simple, showcasing a balance between aerodynamics and styling aesthetics, while also providing better headroom.
19
2
Share

Where is the air conditioning filter located in the Buick GL8?

Buick GL8's air conditioning filter is located inside the glove compartment on the passenger side. You need to remove the lower dashboard panel on the passenger side, which is usually secured with plastic clips. You will then see a rectangular fuse box. After removing the fuse box, you can find the filter near the driver's side. The car's air conditioning filter helps separate solid impurities such as dust, pollen, and grinding particles from the air. The Buick GL8 is an MPV model with dimensions of 5256 mm in length, 1878 mm in width, and 1776 mm in height, with a wheelbase of 3088 mm. The Buick GL8 is equipped with a 2.0T SIDI direct-injection turbocharged engine across the entire lineup, delivering a maximum horsepower of 191 hp and a top speed of 205 km/h, all models comply with the China VI emission standard.
12
4
Share

What are the automotive electronic control systems?

Automotive electronic control systems consist of three parts: sensors, electronic control units, and actuators. Depending on their control functions, automotive electronic control systems can be divided into seven types: power performance, economy and emissions, safety, comfort, handling, off-road capability, and information control systems. During operation, various sensors continuously detect the vehicle's operating conditions and transmit this information in real-time to the ECU through input interfaces. Upon receiving this information, the ECU processes it according to pre-programmed control procedures, makes corresponding decisions, and outputs control signals to the respective actuators through its output interface. The actuators, upon receiving the control signals, perform the corresponding actions to achieve a predetermined function.
11
2
Share

What Causes a Tire Blowout?

Causes of tire blowouts: 1. Speeding and prolonged driving, leading to excessive tire temperature; 2. Abnormal tire pressure; 3. Excessive wear, aging, or cracking of the tire; 4. High temperatures are related to air pressure. When the temperature rises to a certain level, it can cause the tire body to become too thin and lead to a blowout. When a car is driven under high-temperature conditions, the tire is prone to deformation due to thermal expansion and contraction, reducing its tensile strength. Additionally, the heat generated from continuous friction between the tire and the ground during driving, coupled with relatively slow heat dissipation, causes the air pressure to increase, leading to a blowout due to the tire body becoming too thin. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling.
8
1
Share

What is the function of the in-car PM2.5 filter?

The function of the in-car PM2.5 filter is to filter PM2.5 particles from the air. Air pollution is becoming increasingly severe, especially particles with a diameter of 2.5 micrometers or smaller in the air, which can be absorbed into the human body and pose a threat to health, particularly for sensitive individuals. To meet market demands, various car manufacturers have successively produced vehicles equipped with PM2.5 filters. In-car PM2.5 filters are divided into two types: built-in and external. The built-in type is integrated into the car's air conditioning system, while the external type is integrated into the central console of the front seats. PM2.5 refers to particles in the atmosphere with a diameter of 2.5 micrometers or smaller, also known as respirable particles. Their diameter is less than one-twentieth the thickness of a human hair.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.